Menu
Suppliers Products
Global B2B sourcing platform
Verified suppliers and manufacturers
MadeInChina.com > Products > Electrical & Electronics > Power Supply & Distribution > Electric Power Fitting
Swipe or use the arrows to view product images.

Strain Clamps Clevis Pistol (GUN) ACSR 50mm2 Complete with 3 U-Bolts

Price $1.00
Min Order 1000 Pieces
Availability In Stock
Shipping From Hubei, China
Popularity 502 people viewed
Send Inquiry View Full Page
Model NO.:
NLL-3
Technics:
Welding
Standard:
GB
Usage:
Substation Fittings, Line Fittings
Type:
Link Fittings
Bolts:
Not Less Than 6.8 Grade
Material:
Aluminum Alloy
ODM OEM:
Available
Galvanization Type:
Hot-DIP Galvanized
Surface:
Smooth
Application:
Overhead Transmission Line
Trademark:
Oeipower
Transport Package:
Carton
Specification:
copper aluminium
Origin:
China Nangyang
HS Code:
73269090
Product Description
STRAIN CLAMPS CLEVIS PISTOL (GUN) ACSR 50MM2 COMPLETE
WITH 3 U-BOLTS
Cast steel hot dip galvanised
The minimum failing load shall be indelibly marked on
each Pistol clamp.


TYPE:APG-B4
NAME:Parallel groove clamp APG-B4
Specification
  Al 25-240mm²     Size 62*58mm  Double-bolts  Bolt M10*60  Weight 280g
3.6The throat of the staple will present a
diameter range 		mm26.42
3.7Throat Suspension Clamp 
support must have curvature, to allow an angle of entry and exit 
from the driver, 		º30º
3.8Suspension clips present a 
breaking load 		kg11,340
3.9Minimum weight of zinc deposited in the 
hot galvanized steel 		g/m²915
3.10Minimum weight of zinc deposited in 
bolts, nuts and washers 		g/m²400
3.11Dimensions and drawingsmmyes
3.12ASTM standards ASTM 123/153

Material

Connector bodies made of corrosion resistant, high strength aluminum alloy 99.5
Bolts: DIN 933, steel 8.8, dacromet; Nut: DIN934, dacromet, pressed into lower part
Pressure pad: aluminum alloy; Spring washer: DIN127, steel
Conical washer/Spring washers: Steel, DIN6796 corrosion-protected, dacromet
 

4.3The body material will be alloy
of aluminum, bolts, washers and nuts of the fastening system of the staple will be
hot dip galvanized forged steel 		 yes
4.3ACSR 556 conductor diameter. 
4MCM not including the rod 		mm23.54
4.5Breaking loadkg 
4.6The compression type anchor clips 
for the conductor must be supplied with a connection terminal that can be bolted 		 0° o 30°.
4.7Weight of zinc deposited on steelg/m²915 g/m².
4.8Zinc weight deposited on bolts, nuts and washersg/m²400 g/m².
 
4.9Weightkg 
4.1Dimensions and drawings yes
4.11ASTM standards ASTM 123/153
4.12Attach to the staple Norma IEC 60471.


Stainless steel A2 bolts and nuts available according to order.
 

6.3The construction material of the 
splice must be aluminum and aluminum alloy must contain a maximum of 0.1% copper 		 yes
6.4ACSR conductor section 
556.4MCM 		mm²327.93
6.5Lengthm 
6.6Breaking loadkg 
6.7Repair splices for the 
conductor must be preformed rods of the Armor Splice Full type 
Tension."		 yes
6.8Each rod that forms the joint 
must have a mark in its center with indelible ink 		 yes
6.9Weight per unitkg 
  • Similar Products
Full Page Contact Supplier
↑