Stud Bolt

Used in high pressure bolting situations for pipeline, drilling, petroleum / petrochemical refining and general industry for sealing and flange connections all thread, tap end and double end stud bolts are the lion's share of the industry. The all thread stud bolt is a threaded rod with 2 heavy hex nuts, while the tap end and double end are nut continuously thread, but have a body in the middle with one nut. In a tap end the short end of the stud bolt is designed with a UNC 3A fit to go into a tapped hole on the body of a larger machined or forged equipment.At manufacturer's option, ends or points may be rounded (oval), sheared, flat or saw cut and chamfered. When rounded, the stud shall have an oval point with a radius equal to approximately one times the basic stud diameter. When flat and chamfered, the end shall be chamfered from a diameter not exceeding the minor diameter of the thread to produce a length of chamfer or incomplete thread approximately equivalent to 2 times the thread pitch.
We can customize all kinds of bolts according to the drawings provided by customers.