Sundarc Small Desktop Semi-Automatic Selective Wave Soldering Machine for Electronic Factory (FS-250C)

Stable soldering quality with no voids and bridges

The soldering program can be set according to your desired soldering criteria.such as tin transmission, soldering joint fullness, and exposure of component feet.

 Nozzles can also be customized for your PCB.

1.FLUX SPRAY MODULE
Spray characteristics
Selective sprayer,saves at least 90% flux than traditional spray.Ionic contamination is dramatically reduced.
Spray width can be as small as 2mm to significantly reduce ionic contamination.Needn't clean PCBA.
Two axes servo motor control, high positioning accuracy.

2.SOLDERING MODULE
PCB plate fixed, spray and soldering X/Y/Z axis platform moving for soldering joints.
Different soldering speeds and times can be set for different soldering joints on the same circuit board;
Nitrogen in-line heating of the tin pot ensures good wetting of the nozzles and reduces the tin dross;
Wave height monitoring online;
Real-time monitoring of tin pot high and low levels;

3.THE SOFTWARE FEATURES
(1).Full PC control. All parameters can set in PC and saved to PCB menu, like moving path, solder temperature, flux type, solder type ,n2 temperature etc, best trace-ability and easy to get repeat soldering quality.
(2).Simple programming method, using the picture as a base, just draw lines on the picture to program. Parameters can be optimized for each soldering joint position, such as Z-axis soldering height, crest height, soldering travel speed, tin shrinking speed and time, etc. After the path editing is completed, the program can simulate the time needed for the required soldering. It is convenient for engineers to account for the beats.
(3).Path, temperature, speed, solder material and other data are all saved in one file, which can be exported as an EXCEL file. Parameters can be optimized for each soldering position, such as Z-axis soldering height, wave height, soldering movement speed, shrinking speed and time, and so on. After the path is edited, the program can simulate the time required for soldering.
(4).Soldering coordinate point visual positioning, The whole soldering CCD image visualization to facilitate the whole soldering quality tracking
 

Service,maintenance & repair
Here you can expect the service and sales network in electronics manufacturing.Operated by competent service technicians with years of experience.

24/7 availability
For our customers,our global service and sales network is permanently in operation.So that we can always respond and react immediately to increasing demands on the electronics industry.

Remote service
On-site deployment is often not even necessary.Intelligently networked machines allow our technicians to become active remotely.Remotely connected,problems can be detected and rectified directly.Uncomplicated and efficient.