Super Thin Diamond Cutter Saw Blade for Cutting Granite Marble Ceramic Tile Stone Porcelain

Why TOP
TOP specializes in products and solution for professionals. We are focus on providing high-quality and practical home & kitchen products such as diamond saw blades, circular saws, cutting wheels and polishing pads for angle grinder.

• Instructions Before use, make sure that the saw blade is not damaged. If it is damaged, it is strictly forbidden to use. When assembling, the motor shaft is matched with the center of the saw blade, and the error must be less than 0.1mm.
• Note that the direction of the arrow marked on the saw blade is the same as the direction of rotation of the tool used. When cutting, please do not apply side pressure and curve cutting. The feed should be smooth and avoid the impact of the blade on the workpiece to avoid danger. When dry cutting, do not cut continuously for a long time, so as not to affect the service life and cutting effect of the saw blade; wet film cutting should be cooled with water to prevent leakage.
• Experts suggest that after the saw blade is installed, it should be idling for a few minutes to confirm that there is no sway or beating, and then try cutting a few knives on the grinding wheel or refractory brick, and then the normal work is best. If the blade is not sharp enough, use a silicon carbide grindstone to get the edge.

• Size: 4"
• Outer Diameter(mm): 105 mm / 4 inch
• Segment Height: 10 mm
• Core Thickness(mm):1.2 mm
• Rpm:8000-11000
• Arbor:7/8"-5/8" (22.23 mm-20 mm) With reducer washer
• Cutting:dry and wet cutting
• Application:Porcelain tile, Granite ,Marble,stone ,ceramic

• Universal for dry or wet cutting
• X teeth offer fast and smooth cutting
• Super thin porcelain saw blade with free chips for cutting,Match with hand-held machine
• Available for cutting porcelain,ceramic tile,granite, sandstone quartz ect. Cpsia Warning
• Warm Prompt: For your personal protection, before you start working we recommend that you wear safety glasses, dust aspirators, welding gloves, safety shoes, and other appropriate equipment.(Take good care of your eyes/ears/face/hands/body/etc)

Hot-Pressed Segmented   

Hot-Pressed Continuous Rim  

Hot-Pressed Turbo  

Hot-Pressed Turbo Wave  

Hot-Pressed Super Thin Turbo  

Hot-Pressed Fine Turbo  

Hot-Pressed Turbo Segmented With Protective Teeth