Super-Thin Scissor Car Lift for Wheel Alignment in Workshop

1. Turnplate is mobile and available for various kind of car.
2. All the motor pumps and seal kints of cylinder are import from Italy
3. All the hydraulic cylinder are import from Taiwan.
4. Inside of cylinder assy has the special treatment and make sure that is doesn't leak oil.
5. 24V control system and limited switch.
6. While switch is addedary, it is cotrolled long distantly.
7. With secondary jack optional     

1. Hydraulic cylinders: 3 hydraulic cylinders on one side (2 in the front and 1 in the back), a total of 6 hydraulic cylinders, make the lift lift up more quickly, and the X-arm is safer and stronger during the lifting.Other manufacturers only have 6 hydraulic cylinders
2. Unlocking cylinder: double cylinder safety device, 2 cylinders on one side (located next to the hydraulic cylinder at the back), one is broken, the other still works, a total of 4 cylinders, separate the safety teeth more powerfully and quickly lift up.
3. The thickness of the platform is 19cm, which is ultra-thin. Other manufacturers are 22cm thick on the side slides. The orange guards prevent the car from running forward.
4. Standard ultra-thin corner disc, other manufacturers do not. The line from the control cabinet to the lift is protected by the bottom plate and will not be crushed by cars or people.
5. Horizontal bars: one at the front and one at the back to prevent the platform from being uneven during the installation of the secondary lift.
6. The electric wire is different from other manufacturers.
Control system: There are two valves, one to control the oil outlet and the other to control the oil return. Pumping station (motor): The wire is copper wire, the shell is all aluminum alloy, and the heat dissipation is fast
7. Oil-Water Separator: Filters water and oil, reducing breakdowns and Extend the life of the machine