Temperature Measuring Industrial Television System

Temperature measuring industrial television system
Product model: LM-NZ500CW
The temperature-measuring type of high temperature ignition TV is equipped with two cameras respectively. One HIGH-DEFINITION camera is used to observe the real-time image in the kiln, and the other infrared camera is used to measure the temperature in the kiln. At the same time, there are temperature measuring components installed, in the kiln abnormal, sudden power cut, the temperature is too high, the measuring camera automatically quit the kiln when the gas is cut off, to protect the fire industry TV safety, power, ventilation and camera temperature is normal after the automatic control into the kiln. Lm-nz500c endoscope temperature type high temperature industrial TV system adopts dual optical path system structure, combines color CCD and near infrared CCD, and utilizes imaging technology of high-performance color and near infrared CCD to develop "full field real-time monitoring system of workpiece surface temperature in furnace based on color and near infrared CCD".

Product Parameter:
Applicable to furnace with a wall thickness of about 500mm, a wide range of viewing Angle.  Ambient temperature: Temperature in the furnace ≤2000ºC, control system ≤70ºC Automatic exit device: Automatic exit function. When power failure, gas stop, over temperature, and water pressure is low, the probe can automatically return from the furnace exit device with a stroke of 500mm, and manually enter the exit function
Control device: PLC programmable control, 8 inputs, 4 outputs, two levels of control, can achieve the on-site central control operation of two places of power supply requirements: power supply voltage AC220V±10%, power supply frequency 50Hz
Air supply requirements: inlet pressure of compressed air is 0.3~ 0.7mpa
Inlet temperature of compressed air ≤35ºC, minimum flow rate of compressed air 0.3m /min
Image index: resolution 2 million pixels SIGN al-to-noise ratio 56dB
Visual field Angle: random configuration is 17°~81C°
Temperature measurement: Temperature measurement range 700°~1800°
Temperature measuring points: 16 temperature measuring points are optional on the screen. Optional cable configuration:
Power cable AVV3×1, network cable At6, control cable AVPV6×0.5
Cooling air requirements for substrates: Flow rate 300L/min
Scroll cooling tube: When the inlet of compressed air is greater than 0.35MP, the outlet temperature difference of compressed air is 23°C
Installation distance: the maximum distance from the control device to the automatic exit device is 20M, and the maximum distance from the central control room to the site is 25KM