The Pre-Furnace Hot Carbon Silicon Analyzer Is Used for The Carbon Silicon Element Detection of Gray Cast Iron and Ductile Iron

           
shipping list
 

Application field

      Installation and use method

    1. Use a 220v power supply with a grounded triangular plug socket, and confirm that the power socket is correctly connected and well grounded!

     2. Avoid installing the instrument in an environment with a strong magnetic field or electric field.

     3. A series of data such as the carbon, silicon and manganese content of the molten iron can be measured by the furnace worker by the way, by pouring a small scoop of molten iron into the pouring cup.

     Operation interface, functional features
   
     1. Power on then turn on the power and press the power button once;

     2. After startup, the system will automatically enter the interface of composition determination

      Interface description:
   
    The sample cup is installed on the supporting bracket of the instrument. The instrument displays the current indoor temperature. The furnace operator only needs to ladle a ladle of hot metal (about 1300 ºC is recommended) into the sample cup. The instrument starts automatic analysis, dynamically displays the analysis process curve in real time, and automatically saves the analysis results. According to the content of the results, it automatically calculates the amount of carburizer, ferrosilicon and scrap that need to be added.

     Test interface of carbon, silicon and manganese in front of furnace----Dynamic display of measurement process----Automatic calculation of batching adjustment
 
      Click----test item selection----conduct tensile strength and hardness test
 
      Click----test item selection----carry out spheroidization rate strengthening level test