Menu
Global B2B sourcing platform
Verified suppliers and manufacturers

Thread G1/4 G1/2 Water Liquid Paddle Electrical Flow Controller Switch

Price $159.00
Min Order 1 Piece
Availability In Stock
Shipping From Shanghai, China
Popularity 511 people viewed
Model NO.:
cx
Certification:
CE, ISO, GS
Experience:
More 20 Years
Exported:
More 80 Countries
Price:
Competitive
Maintenance:
Less and Easy
Technology:
Advanced
Standard:
Standard
Trademark:
GN
Transport Package:
Carton
Specification:
CE SGS ISO
Origin:
Shanghai
Product Description
Paddle flow switch(liquid flow switches, flow switch) ZZS FLOW SWITCH

Specifications:
Our Liquid Switches are Single-Pole-Double-Throw(SPDT) flow switches that are used in liquid lines carrying water, ethylene glycol, or other liquid not classified as hazardous. They can be wired to energize one device or powered from the same source when liquid flow either exceeds or drops below the set flow rate.

The rate of the flow can be adjustable and it is stable
Liquid temperature range: 0~+100
Max. Working Pressure: 13.5bar
Flow switch can not be used where the liquid in the pipes will drop below the liquid's freezing point

Product Flow Switch
Maximum Liquid Pressure 150psig()1034kpa
Minimum Liquid Temperature 32oF(16)
Maximum Liquid Temperature 250oF(121)
Electrical Ratings 120VAC 208VAC 240VAC 277VAC 24VDC
Horsepower 1 1 1 -
Full Load Current 16 8.8 8.8 -
Locked Rotor Current 96 52.8 48 -
Non-inductive Current 16 16 16 -
Pilot Duty 125VA at 24/277VAC
Wiring Connection Screw Type Terminals
Pipe Connector 1", 1.5" NPT Threads

Type Connection size Range of required to actuate switch (L/min)
Min. Flow Max. Flow
Decrease of flow Increase of flow Decrease of flow Increase of flow
ZZS 1 18 21 45 50
2001-1-2 30 35 100 105
2 50 58 150 155
2002-1-2 75 86 187 200
3 100 115 225 260
ModelConnectionNotesAccuracy 
HFS-251″-11½NPT ScrewRed case5% 
HFS-20¾″-14NPT Screw 
HFS-15½″-14NPT Screw 
JYF-251″-11½NPT ScrewWhite case2-3% 
JYF-20¾″-14NPT Screw 
JYF-15½″-14NPT Screw 
 
Rated Voltage ⁄ Rated AmpsA.C.125  ~  250VPower (Cosmp.)
Non-inductive Current12A1
Full Load12A0.75
Locked Roter72A0.45
 
Required Flow for actuating switch (m3/hr)
Pipe size (in)11-¼1-½22-½34568
Min. FlowFlow lower, 1-2 closed11.31.73.14.16.28.412.916.846.6
Flow lower,
1-3 closed
0.60.81.12.22.84.36.19.312.338.6
Max. flowFlow lower,
1-2 closed
234.46.67.81218.426.832.794.2
Flow lower,
1-3 closed
1.92.84.16.17.311.417.325.230.790.8
  • Similar Products
Full Page Contact Supplier