Three Phase High Voltage Meter Test Equipment Three Phase Electricity Meter Withstand Voltage Test Bench

Brief Introduction:
The three-phase withstand voltage test bench is a carefully designed equipment specifically designed for testing the withstand voltage test of three-phase energy meters according to regulations and industry standards. It has the advantages of complete functionality, high accuracy, simple operation, and safe use.


Technical indicators:
1.1 Energy meter type: three-phase

1.2 Technical indicators of voltage tester:
a) Output voltage: 0-5000V, automatically output according to the setting;
b) Output current: 10mA~200mA; Adjustable;
c) Output voltage control mode: manual and automatic adjustment;
d) Test time: 0-999.9 seconds;
e) The rise and fall time can be adjusted, and it can slowly rise and fall;
f) Rated capacity: 500VA.
g) Display accuracy: 2%
h) Output voltage waveform distortion:

1.3 Technical indicators of epitopes:
1) Leakage current: 1mA~9mA; Resolution: 1mA

1.4 Test items:
1) UI/Shell and Auxiliary
2) U/I
3) IA/IB; IB/IC

1.5 List quantity: 6 table positions


Product Features:
2.1 This device meets the requirements of the voltage withstand test for electronic meters in JJG 596-2012; At the same time, it meets the pressure test requirements for mechanical watches in JJG 307-2006.
The 2.2 device has complete protection functions, and the working face is equipped with a light curtain protection, which can quickly cut off the high-voltage output and protect personnel from entering the high-voltage area by mistake.
2.3 Device installation sound and light alarm, warning light flashing during high voltage output;
2.4 Each meter position is equipped with an independent leakage current detection function. When a certain meter breaks down, the breakdown meter position can be quickly cut off, and other meter positions can be tested normally with a red light indicator and an audible alarm.
The 2.5 device adopts an aluminum alloy integrated structure and fireproof wooden boards.
2.6 Use crimp type junction boxes that comply with the Southern Power Grid, without the need for screws and wiring.Energy meter withstand voltage test device