Tilting and Swing Tester Motion Simulation Test Machine for Ship

 The tilt and swing test machine is mainly used to simulate the tilt and sway tests of various types of machinery, electrical, electronic products, and maritime household appliances placed on ships, seaplanes, offshore oil exploration platforms and other equipment to determine the product's ability to withstand Specifies severity level tilt and swing capabilities and knot integrity.

The tilt and swing test machine is currently a technology that can more realistically reflect the impact of the actual marine environment on products. It has high reproducibility in the actual marine environment and can well evaluate the product's adaptability to the environment.

The severity of the rocking of the ship rocking test bench is not only affected by the relative heading, but also by the ship parameters, wind and wave parameters, and relative speed.

The six forms of sway that may occur in actual ships may not all exist at the same time. The rocking pattern produced is mainly determined by the ship's course position relative to the waves. Therefore, when choosing the form of rocking test for a product, it should mainly depend on which will have an important impact on product performance or structure. Generally, the main movements are rolling, pitching and heaving.
Features of ship tilt and sway test testing machine:

1. Adopt hydraulic servo system, accurate positioning and smooth waveform;
2. Fully automatic remote control interface, the operator only needs to input simple values to accurately complete the tilt and swing test;
3. The operation interface is mainly based on the real-time display window of the data curve, and also displays test parameters, system status, test progress, etc.;
4. Realize functions such as sinusoidal signal, self-closed loop adjustment, various function controls, and alarm prompts;
5. The rolling, pitching, rolling and tilting test functions are completed on the same platform.
The equipment meets the following standards:

GB2423.31-85 "Basic Environmental Testing Procedures for Electrical and Electronic Products Tilt and Swing Test Methods" GB2424.20-85 "Basic Environmental Testing Procedures for Electrical and Electronic Products Tilt and Swing Test Guidelines": GJB150.23-91 "Environmental Testing of  Equipment Methods Tilt and Rocking Tests".