Swipe or use the arrows to view product images.
Tmt Rebar Coil Rolling Mill Consist of Gear Box
| Price | $150000.00 |
|---|---|
| Min Order | 1 Set |
| Availability | In Stock |
| Shipping From | Shaanxi, China |
| Popularity | 498 people viewed |
Model NO.:
HJ-A00101
Application:
Machinery
Function:
Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout:
Finishing Rolling Mill Group
Hardness:
Hardened Tooth Surface
Installation:
Vertical Type
Step:
G2.5
Type:
Speed Increasing Gearbox
Item:
Speed Increasing Gear Box-90m
Highest Speed Output Ratio:
45/157=0.2866
Lowest Speed Output Ratio:
(60/157)X(55/60)=0.3503
Motor Power:
4500kw
Motor Speed:
1000/1300 R/Min
High-Speed Output Shaft Speed:
4019 R/Min
Low-Speed Output Shaft Speed:
3288 R/Min
Gear Meshed Speed:
77.2 M/S
The Backlash Is Less Than:
0.36 mm
Gear Balancing Precision Grade:
G2.5
Trademark:
Hangji
Transport Package:
Seaworthy Packing or as Customer's Request
Specification:
ISO, SGS, BV
Origin:
Shaanxi, China
HS Code:
8455219000
Product Description
Speed increasing gear box of 90m finishing mill
Composition of speed increasing gearbox
Spare parts of speed increasing gearbox case, support base, big gear, transmission axis, bevel wheel and lubrication system.
Technical characteristics
1, technical parameter
| Highest speed output ratio | 45/157=0.2866 |
| Lowest speed output ratio | 60/157)x(55/60)=0.3503 |
| Motor power | 4500kW |
| Motor speed | 1000/1300r/min |
| High-speed output shaft speed | 4019r/min |
| Low-speed output ratio | 3288r/min |
| Gear meshed speed | 77.2m/s |
| The backlash is less than | 0.36mm |
Box is melt with thick steel with great quality to reach the intensity that the case required. Case should take stress aging treatment before the produce to reach the stability that required.
Big gears and gear shaft used carbon alloy steel forging blank, after roughing, workpiece need to take ultrasonic flaw detection process to quench. In order to ensure the tooth surface with high hardness, tooth surface need to take carburizing and quenching treatment after semi-finishing .Fine grind of tooth surface to insure the high accuracy, after finishing the production of gear, the balance test is needed, the experience speed is 1500r/min and the balance level is G2.5.
Transmission shaft use the alloy steel forging blank, transmission shaft takes quenched to make sure the intensity and durableness. After the semi- finishing, transmission need to grind to guarantee the accuracy of every workpiece.
When the assemble finished, the no-loading test should be keep 2-4hours, the speed is 1200r/min, the temperature of shaft should not exceed 60ºC,the work of gear should be smooth, no hitting noise and concussion, every joint surface should not have oil spill phenomenon.
- Similar Products
$30000.00
1 Piece (MOQ)
Duoling Brand Jhm Series Gearbox for Single Screw Extruder
Jiangyin Gearbox Manufacturing Co., Ltd.
$380000.00
1 Piece (MOQ)
Speed Increasing Gearbox for Wind Power Generation
CRRC QISHUYAN INSTITUTE CO., LTD.
$25000.00
1 Piece (MOQ)
High Torque Zsyj Horizontal Single Screw Extruder Gear Reducer
Zhejiang Yifan Gearbox Co., Ltd.