Swipe or use the arrows to view product images.
Tubular Membrane Microbubble Air Diffusion Aeration Tube for Water Treatment
| Price | $13.00 |
|---|---|
| Min Order | 100 Pieces |
| Availability | In Stock |
| Shipping From | Jiangsu, China |
| Popularity | 521 people viewed |
Model NO.:
TZ1449M
Warranty:
1 Year
Type:
Aerators
Method:
Physical Treatment
Usage:
Industrial, Agriculture
Supporting Frame:
with PVC or ABS Pipe
Service Life:
5 Years
Membrane Thickness:
1.7-2mm
Membrane Material:
EPDM/Silicone
Length:
500/750/1000mm
Package Size:
20X10X10 Cm
Connector:
3/4NPT
Application:
Oxygen Supply
Productivity:
500L/Hour
Oxygenation Capacity:
0.26KGO2/M3h
Bubble Size:
1-2mm
Service Area:
0.5-3 M2/M
Transport Package:
Carton Packing
Specification:
550mm-1050mm/DN63-DN90
Origin:
Jiangsu, China
HS Code:
4009110000
Product Description
The wastewater treatment of activated sludge and contact aeration process and aquarium will all need high Oxygen transfer rate or Oxygen transfer efficiency, and low pressure loss by the membrane. The reinforced EPDM can continuously create fine bubble from slots on the EPDM membrane of disc type or tube type diffuser.
The expected duty life may be over five years without tearing or bursting. There are other material selections of self-sink silicon rubber membrane, ceramic diffuser, air stone, and coil looking diffuser. There are also course bubble air diffuser for application of liquid mixture. The diffuser can be used for roots blower, ring blower and linear air pump. The diffuser also has advantage of much energy reduction.
Our Fine Bubble Tube Diffuser can be connected on one side or in pairs to different rectangular and round tubes (ABS material) with the appropriate adapter.The support tubes(ABS or PVC material)can be reused when membranes are replaced. The units offer maximum performance at minimum cost and require minimum maintenance.
Technology Parameter
| Length 500mm | Length 750mm | Length 1000mm | |
| Service Area | 0.5-1.5 m2 | 0.75-2.25 m2 | 1-3 m2 |
| Bubble Size | 1-2mm | 1-2mm | 1-2mm |
| Perforation Size | 1mm | 1mm | 1mm |
| Perforation Quantity | 17000 | 17000 | 17000 |
| Membrane Thickness | 1.7-2mm | 1.7-2mm | 1.7-2mm |
| Temperature | 0-80ºC | 0-80ºC | 0-80ºC |
| Resistance Loss | 1900-3000 pa | 1900-3000 pa | 1900-3000 pa |
| Oxygen Utilization | 27%-38% | 27%-38% | 27%-38% |
| Air Flow | 1.5-5 m³/h | 2.25-7.5m³/h | 3-10 m³/h |
| Material | EPDM/Silicone | EPDM/Silicone | EPDM/Silicone |
| Diameter | φ63/φ65/φ90 | φ63/φ65/φ90 | φ63/φ65/φ90 |
We offer OEM manufacturing with high reliability and stability of performance, efficient and effective satisfaction of your clients. Let our diffuser be the best choice of your solution.
Features
- High oxygen transfer efficiency.
- High resistance to clogging.
- High resistance to corrosion.
- Wide air flow range.
- Low pressure loss.
- Low energy cost.
- Easy installation.
- Uniform fine bubble.
- Back flow prevention.
- Self cleaning operation.
- Intermittent operation capability.
- Slide-off prevention designed.
- Cost saving.
- Membrane with EPDM or Silicone Rubber compound.
- Air inlet modled injection of PVC or ABS.
- Supporting frame with PVC or ABS pipe.
- Clamp with stainless steel.
- Non tearing & non clogging I-shapped slits.
Applications
- Municipal wastewater treatment.
- Industrial wastewater treatment.
- Clean water treatment.
- Sludge stabilization.
- Wastewater ozone diffusion.
- Aeration of fish ponds.
- Aeration of streams and lakes.
- Similar Products