$0.80
1000 Pieces (MOQ)
1.0MHz Ultrasonic Flow Sensor for Water Flow Meter
NINGBO FBELE ELECTRONICS CO., LTD.
Swipe or use the arrows to view product images.
Ultrasonic Sensor for Carpet Detection to Change to Vacuum Mode Floor Recognition
| Price | $8.00 |
|---|---|
| Min Order | 20 Pieces |
| Availability | In Stock |
| Shipping From | Sichuan, China |
| Popularity | 397 people viewed |
Type:
High Frequency Ultrasonic Sensor
Output Signal Type:
Digital Type
Production Process:
Ceramics
Sensitivity:
High
Probe Type:
Dual Probe
Measuring Medium:
Air
Detection mode:
Echo Reflection
IP Rating:
IP67
Certification:
RoHS
Customized:
Customized
Trademark:
HTW
Transport Package:
1300PCS Per Package
Specification:
diameter-16mm
Origin:
China
HS Code:
9031809090
Product Description
Appearance can be imitated, but quality can NEVER be imitated
| Parameter | Unit | Value |
| Installation height | KHz | 30±1mm |
| Driving frequency | KHz | 300±10kHz |
| Power-on delay | s | ≤30ms |
| Operating Voltage | VDC | 4.9~5.1 |
| Directivity | Deg | ≤12° |
| Working current | mA | ≤10mA |
| Interface Type | / | COM(3.3V) |
| Bps | / | 57600 |
| Data bit | / | 8 |
| Check bit | / | None |
| Stop bit | / | 1 |
| Output | / | TOF(us), digital signal |
| Connection | / | Connector: A1251H-4P/CJT with pin interval of 1.25mm |
| Precision | mm | ≤2mm |
| Shell material | -- | PC |
| Shell Color | -- | Black |
| Working temp. | ºC | 0~40ºC |
| The comparison of other models of floor material recognition sensor/transducer: | |||||
| Product | Output | Type | PCBA embedded | Algorism Pre-installed | Remark |
| HT-300PLT1612 | Analog signal | Transducer | NO | NO | Cheapest, R&D in algorism needed |
| HT-300PLT-A | Analog signal | Sensor | YES | NO | Cheaper, Signal amplified and filtered R&D in algorism needed |
| HT-300PLT-M | Digital signal (COM) | Sensor | YES | YES | Time-saving in algorism, directly set up the value for different floor materials to be able to differentiate |
| HT-300PLT-MIR | Digital signal (COM+I/O) | Sensor | YES | YES | Time-saving in algorism, the default mode is I/O, directly outputting the result for either hard or soft floor type, it can be switched to COM mode to set up threshold value for more floor material detection |
- Similar Products