Menu
Suppliers Products
Global B2B sourcing platform
Verified suppliers and manufacturers
MadeInChina.com > Products > Manufacturing & Processing Machinery > Other Manufacturing & Processing Machinery
Swipe or use the arrows to view product images.

Underwater Robot Rov Thruster 48kg Thrust 2.3kw

Price $9000.00
Min Order 1 Piece
Availability In Stock
Shipping From Tianjin, China
Popularity 299 people viewed
Send Inquiry View Full Page
Model NO.:
T1060
Rated Power:
2.3kw
Rated Voltage:
72/300VDC
Max Rpm:
1880r/Min
Nozzle:
Black
Propeller Handing:
Left/Right
Propeller Material:
Ss
Housing:
Al/Ti
Control Mode:
Analog/Can/RS485
Rpm Feedback:
Pulse/Analog/Can/RS485
Electronics:
Built-in/External
Thrust:
48kg Forward, 24kg Reverse
Trademark:
Haoye
Transport Package:
Wooden Case
Specification:
6.5kg in Air; 4.1kg in Water
Origin:
China
HS Code:
8487100000
Product Description
Product Description
Max RPM1880r/min
Forward thrust48kg
Reverse thrust24kg
ElectronicsBuilt-in or external
Speed controlanalog voltage control(0~5v forward, 0~-5v reverse)
Rated power2.3kw
Detailed Photos



Our Advantages
1. We have installed power isolation, overcurrent protection and overheat protection for the built-in drivers. A ramp linear processing is performed on the control signal. These two upgrades allow the thruster to switch directions frequently and quickly. And voltage fluctuations +-15% will not cause any harm to the thruster. Makes the thruster has long-life.
2.We use alloy bearings with water lubricating effect, which are very advantageous in terms of wear resistance and quality.
3.Our thruster adopt magnetically coupled drive technology, is the one that magnet array fitted inside the propeller hub is driven by the one attached inside the housing of the thruster, so as to realize non-contact and leak-free transmission of torque. magnetically coupling structure will produce ratchet effect in case of overload, to prevent the damages caused by objects jammed into the propeller.
4.Not only we have capacity from R&D to produce, but also we have professional test pool, which simulate real marine environment, adding sand and shells, we test them before each model is molded, one-time charging for thrusters, uninterruptible power supply, running at full power for more than 1,000 hours. The total time of fatigue test and other tests reaches 3000 hours.
5. We have a professional five-axis machining center, propeller integrated molding. It is SS material.
  • Similar Products
Full Page Contact Supplier
↑