Swipe or use the arrows to view product images.
Underwater Thruster with Thrust of 95kg Operating at 260VDC-330VDC
| Price | $15000.00 |
|---|---|
| Min Order | 1 Piece |
| Availability | In Stock |
| Shipping From | Tianjin, China |
| Popularity | 254 people viewed |
Model NO.:
T2040S
After-sales Service:
One Year
Warranty:
One Year
Material:
Steel
Blades:
3
Certification:
ISO9001:2000, CE
Weight:
15.2kg in Air; 8.8kg in Water
Depth Rating:
850m
Rated Power:
6.5kw
Rated Voltage:
260VDC-330VDC
Housing:
Al/Ti
Trademark:
Haoye
Transport Package:
Wooden Case
Specification:
overall length 530mm
Origin:
China
HS Code:
8479899990
Product Description
Model T2040S
2.We use alloy bearings with water lubricating effect, which are very advantageous in terms of wear resistance and quality.
3.Our thruster adopt magnetically coupled drive technology, is the one that magnet array fitted inside the propeller hub is driven by the one attached inside the housing of the thruster, so as to realize non-contact and leak-free transmission of torque. magnetically coupling structure will produce ratchet effect in case of overload, to prevent the damages caused by objects jammed into the propeller.
4.Not only we have capacity from R&D to produce, but also we have professional test pool, which simulate real marine environment, adding sand and shells, we test them before each model is molded, one-time charging for thrusters, uninterruptible power supply, running at full power for more than 1,000 hours. The total time of fatigue test and other tests reaches 3000 hours.
5. We have a professional five-axis machining center, propeller integrated molding. It is SS material.
| Max RPM | 1600r/min |
| Forward thrust | 95kg |
| Reverse thrust | 95kg |
| Electronics | Built-in or external |
| Speed control | Analog voltage/CAN |
| RPM | pulse/analog voltage/CAN |
1. We have installed power isolation, overcurrent protection and overheat protection for the built-in drivers. A ramp linear processing is performed on the control signal. These two upgrades allow the thruster to switch directions frequently and quickly. And voltage fluctuations +-15% will not cause any harm to the thruster. Makes the thruster has long-life.
2.We use alloy bearings with water lubricating effect, which are very advantageous in terms of wear resistance and quality.
3.Our thruster adopt magnetically coupled drive technology, is the one that magnet array fitted inside the propeller hub is driven by the one attached inside the housing of the thruster, so as to realize non-contact and leak-free transmission of torque. magnetically coupling structure will produce ratchet effect in case of overload, to prevent the damages caused by objects jammed into the propeller.
4.Not only we have capacity from R&D to produce, but also we have professional test pool, which simulate real marine environment, adding sand and shells, we test them before each model is molded, one-time charging for thrusters, uninterruptible power supply, running at full power for more than 1,000 hours. The total time of fatigue test and other tests reaches 3000 hours.
5. We have a professional five-axis machining center, propeller integrated molding. It is SS material.
- Similar Products
Negotiable
1 piece (MOQ)
Made-to-Order-Copper Six-Blade Propeller Made in China
Zhenjiang Jinye Propeller Co., Ltd.
Negotiable
50 Pieces (MOQ)
Powerwing Stainless Steel Propeller for YAMAHA Outboard Motor (PWY91410S)
Qingdao Tofun Marine Co., Ltd.
Negotiable
1 piece (MOQ)
Made in China-Ni-Ai Bronze (Cu3) -56m Engineering Ship Propeller
Zhenjiang Jinye Propeller Co., Ltd.
Negotiable
1 piece (MOQ)
Made in China-Ni-Ai Bronze (Cu3) -High-Speed Propeller
Zhenjiang Jinye Propeller Co., Ltd.