Swipe or use the arrows to view product images.
Upe1000 Engineering Molded Polyethylene UHMWPE Board Sheet
| Price | $1.20 |
|---|---|
| Min Order | 1000 Square Meters |
| Availability | In Stock |
| Shipping From | Shandong, China |
| Popularity | 285 people viewed |
Model NO.:
PE1000
After-sales Service:
Yes
Warranty:
Yes
Material:
PE
Kind:
Hard Plastic Sheet
Water Absorption:
＜0.01%
Contraction Percentage:
＜0.4%
Tensile Strength:
51~80MPa
Standard Size:
1200X2400mm, 1000X2000mm, 1500X3000mm, 1500X4000mm
Width:
as Reqeust
Length:
as Request
Thickness:
0.4- 60 mm
Color:
as Request
Trademark:
TSD
Transport Package:
Wooden Pallet
Specification:
ISO
Origin:
Qingdao
HS Code:
39201090
Product Description
UPE1000 Engineering Polyethylene UHMWPE Board Sheet
TSD UHMWPE Sheet, or PE500, PE1000 range of Ultra High Molecular Weight Polyethylene has a very high impact strength and wear resistance given it's extremely long molecular chains and molecular mass of between 4.5 to 7.5 million amu. Service temperature range from -260 degrees C to +80 degrees C. The UHMWPE range is available in Natural (White), Green & Black Anti Static(AS), Black Fender, Super lining Blue with longer wear life. All UHMWPE sheets are molded pressed and planed and have very good machining properties which make this an ideal material for food production, port construction and mining applications..
Very high abrasion resistance and impact resistance
Low coefficient of friction
Self-lubricating on non-adhesive surfaces
Reduce maintenance costs and extend equipment life
Corrosion resistance
Extremely robust
Good chemical resistance
Low moisture absorption
| Specific Gravity, 73°F | 0.944 | g/cm3 |
| Tensile Strength @ Yield, 73°F | 3250 | psi |
| Tensile Modulus of Elasticity, 73°F | 155,900 | psi |
| Tensile Elongation (at break), 73°F | 330 | % |
| Flexural Modulus of Elasticity | 107,900 | psi |
| Compressive Strength at 2% deformation | 400 | psi |
| Compressive Strength 10% Deformation | 1200 | psi |
| Deformation Under Load | 7 | % |
| Compressive Modulus of Elasticity, 73°F | 69,650 | psi |
| Hardness, Durometer (Shore "D" scale) | 69 | |
| Izod Impact, Notched @ 73°F | 30 | ft.lbs./in. of notch |
| Coefficient of Friction (Dry vs Steel) Static | 0.17 | |
| Coefficient of Friction (Dry vs Steel) Dynamic | 0.14 | |
| Sand Wheel Wear/Abrasion Test | 95 | UHMW=100 |
| Coefficient of Linear Thermal Expansion | 11 | in/in/°F x 10-5 |
| Melting Point (Crystaline Peak) | 279-289 | °F |
| Volume Resistivity | >1015 | ohm-cm |
| Surface Resistivity | >1015 | ohm-cm |
| Water Absorption, Immersion 24 Hours | Nil | % |
- Similar Products