Vehicle Loop Detector for Car Park Management

Single Loop Sensor for Highway Parking System; Two-way output relays; 10 grades adjustable;
It is used for wherever vehicles have to be detected, for example for monitoring and safe-guarding access ways or for counting vehicles. The output signal can be used for controlling door and gate drive mechanisms, operating barriers, controlling traffic light systems or activating card dispensers in parking lots.

Technical Parameters
Operating voltages: 220V AC± 10% 12VDC
Power consumption: <5W
Output: Relay output
Frequency range: 20kHz to 170kHz (4 grades adjustable)
Reaction time: 20 ms
Sensitivity: 10 grades adjustable
Loop inductance: Ideal 100~300µ H (include connecting wiring)
Max 50µ H~1000µ H (include connecting wiring)
Loop coil Wiring: Max. 100m, twisted at least 20 times per meter
Total resistance: <10 Ohm
Operating temp.: -30 to +75 degree
Storage temp.: -40 to +85 degree
Relative humidity: ≤ 95%
Connection: 11-pin socket
Shell: PC + ABS engineering plastics
Installation: DIN rail
Dimensions: 110× 60× 100 mm (L× W× H)
Net Weight: 400g (include socket)