Menu
Suppliers Products
Global B2B sourcing platform
Verified suppliers and manufacturers
MadeInChina.com > Industrial Equipment & Components > Filtration Equipment & Parts > Filter Membrane
Swipe or use the arrows to view product images.

Water Treatment Machine Reverse Osmosis Membrane RO Membrane Bw 4040 8040

Price $70.00
Min Order 1 Piece
Availability In Stock
Shipping From Guangdong, China
Popularity 244 people viewed
Send Inquiry View Full Page
Model NO.:
FROTEC-BW4040, 8040
Membrane Type:
Tubular
Type:
RO
Trademark:
FROTEC
Transport Package:
in Carton & Pallets
Specification:
4040, 8040
Origin:
Guangzhou
HS Code:
8421219990
Product Description

FROTEC BW-8040 / BW-4040 high pressure membrane



FROTEC BW-8040 / BW-4040 elements can separate salts from water and increase permeability while offering superior salt rejection. They are ideal for use in large-scale industrial and municipal water treatment systems.

FROTEC BW-8040 / BW-4040 elements can lower the cost of desalination by improving energy efficiency and productivity significantly.

 

Suitable for:


new-built or existing RO systems.
high quality permeate while minimizing unit cost.
various operating conditions with 4″and 8″elements.




Product Specifications
 
ModelActive Membrane Area
ft2(m2)		Stabilized Salt Rejection
%		Minimum Salt Rejection
%		Permeate Flow
Rate gpd(m3/d)
BW-8040400(37)99.599.010,500(40)
BW-404078(7.2)99.599.02,050(7.8)

Test Condition: Feed Water Pressure 1.55MPa (225 psi); Feed Water Temperature 25 °C (77 °F); Feed Water Concentration 2,000 ppm NaCl; Feed Water pH 7; Permeate Recovery 15%.

 

 

Dimensions


 
ModelA inch(mm)B inch(mm)C inch(mm)D inch(mm)
BW-804040(1,016)01.125(29)7.9(201)
BW-404040(1,016)1.05(26.7)0.75(19)3.9(99)


Operation   Condition
Maximum Operating Pressure                                        41 bar(600 psi)
Maximum Operating Temperature                                   45ºC(113ºF)
Maximum Pressure Drop per Element                            1.0 bar (15 psi)
pH Range, Continuous Operation                                   2-11
pH Range, Chemical Cleaning                                       1-13
Maximum Feed Silt Density Index (SDI15)                      5.0
Free Chlorine Tolerance                                                 < 0.1 ppm
 

Note

  1. Permeate flow rates for individual elements may vary ±15%.
  2. Membrane active areas may vary ±4%.
  3. Stabilized salt rejection is generally achieved after continuous using for 24-48 hours, which depending on feed water qualities and operating conditions.

  • Similar Products
Full Page Contact Supplier
↑