Waterproof PVC Plank Click Wood Grain Rigid Core Spc Vinyl Flooring

Product Parameter

1)Waterproof and Dampproof 

As the main component of SPC is stone powder, it performs well with water, and mildew will not develop in high humidity.

2)Fire Retardant 

According to authorities, 95% of the victims were burned in the fire caused by the toxic fumes and gases. The fire rating of SPC flooring is NFPA Class B. It is lame retardant, dose not spontaneously combust, extinguishes flames automaticly within 5 seconds, won't produce toxic or harmful gases.

3)No Formaldehyde 

SPC is made of high quality stone power & PVC resin, without harmful material such as benzene, formaldehyde, or heavy metals.

4)No Heavy Metal, No Lead Salt

The Stabilizer used in SPC is Calcium zinc, without any lead salt or heavy metals.

5) Dimensionally Stable 

Exposed to 80° heat, 6 hours---Shrinkage ≤ 0.1%; Curling ≤ 0.2mm

6) High Abrasion Resistance

SPC flooring has a transparent wear-resistant layer, whose revolution is up and higher than 10000 turns.

7) Superfine Anti-slip

SPC flooring has a special slip-resistant and wear-resistant layer. Compared with common floors, SPC flooring has higher friction when wet.

8) Low requirement of subfloor 

Compared to traditional LVT, SPC flooring has a distinct advantage due to its rigid core, which can hide many imperfections of subfloor.


Jobsite Photos

Q1: Do you offer free sample?

A1: Yes, free samples are available.

Q2: What is your lead time?

A2: Within 15 days after we receive the prepayment.

Q3: What is your payment terms?

A3: 30% deposit and 70% upon the copy of B/L.

Q4: How do I properly clean and maintain my SPC flooring?

A4: To clean dirt that won't come up with a sweep or vacuum, use a non-rinsing cleaner that
leaves no residue and a mop. Avoid using an abrasive cleaner, oil cleaner, or dish detergent.

Q5: Can I walk on my SPC floor and mop it immediately after installation?

A5: It is not recommended to walk on your SPC floor after installation for at least 24
hours. You can mop your floor immediately after installation.

Q6: How do I repair a chip or scratch in my vinyl flooring?

A6: Chips and deep scratches in SPC generally cannot be removed, but they can be hidden or
concealed. To remove scuff marks try rubbing a drop of mineral spirits, turpentine, paint
thinner, or baby oil over the mark. Then wipe the scuff away with a soft cloth. Be sure to
wipe the SPC floor thoroughly with a damp cloth afterwards, as these solutions can leave residue.