Swipe or use the arrows to view product images.
Wholesalers CO2 Laser Fraccionado CO2 Fractional Laser Machine with Metal RF Tube Skin Resurfacing Machine
| Price | $4199.00 |
|---|---|
| Min Order | 1 Set |
| Availability | In Stock |
| Shipping From | Guangdong, China |
| Popularity | 339 people viewed |
Model NO.:
BG862
Type:
Laser Beauty Equipment
Theory:
CO2 Laser
Application:
Salon
Portable:
Non Portable
Handle Power:
1-60W (Adjustable)
Machine Powr:
450W
Laser Wavelength:
10.6um
N/W:
39kg
Package Size:
116cm*56cm*47cm
Divergence Angle:
4mrad
Focused Spot Diameter:
Less or Equal to 0.4mm
Tool Bit Focus:
F=100mm(Optional)
Pulse Width:
0.1-10ms
Aiming Beam:
Red Diode Laser(650nm,2MW)
Transmission System:
Spring-Balanced 6 Joint Arms
Cooling System:
Inside-Circle Coolant
Display:
12.1 Inch Color Touch Screen
Working Environment Temperature:
5-40degree
Humidity:
Less Than 80%
Trademark:
BEIR
Transport Package:
Wooden Case
Specification:
116*56*47cm
Origin:
Guangdong
HS Code:
8543709990
Product Description
Wholesalers co2 laser fraccionado Co2 Fractional Laser Machine With Metal RF Tube Skin Resurfacing Machine
| Working mode | single pulse, continuous pulse, repeated pulse, ultra pulse |
| Output power | 0-60W(adjustable) |
| Input power | 450VA |
| Laser type | Sealed-off CO2 laser |
| Laser wavelength | 10.6μm |
| Divergence angle | 4mrad |
| Focused spot diameter | ≤0.4mm |
| Tool bit focus | F=100mm(optional) |
| Pulse width | 0.1ms-10ms |
| Aiming beam | Red diode laser(650nm, 2mW) |
| Transmission system | Spring-balanced 7 joint arms |
| Cooling system | Inside-circle coolant |
| Display screen | 12.1 color touch screen |
| Working environment temperature | 5-40ºC |
| Humidity | <80% |
| Air pressure | 86Kpa-106 Kpa |
| Input power | AC220V±10%, 50Hz |
| Preheating-time | >5min |
| Electromagnet | No electromagnet interrupt |
| other working environment | No obvious shaking or airflow |
| N. W./G.W | 39kgs/56kgs |
| Pack size | 116 ×56×47cm |
Working Theory
The wavelength of CO2 laser is 10.6μm, which can be fully absorbed by human biology tissue (all the skin are available). The sealed-off fractional CO2 laser, whose output laser-light will be transferred by articulated arm, which has better sense of direction and higher energy density.
The CO2 laser operates in the invisible infrared waveband, and an aiming beam is required to see where the treatment beam will impact tissue more recently from a visible red diode laser. When the laser beam go through the focus lens, the produced heat will gasify the target tissue.
With fractional laser resurfacing the laser beam is broken up or fractionated into many small micro beams which are separated so that when they strike the skin surface small areas of the skin between the beams are not hit by the laser and left intact. These small areas of untreated skin promote a much more rapid recovery and healing with less risk of complications. The small areas treated by the fractional micro beams, called micro treatment zones, cause sufficient laser injury to promote new collagen production and resultant facial skin rejuvenation.
Application
(1) Remove acne and acne marks;
(2) Eliminate dry pattern, fishtail, etc around the eyes;
(3) anti-aging: skin firming, wrinkle removal, improve the skin condition;
(4) Treatment of pigmentary lesions such as freckles and ostrum miracles;
(5) Scar: treatment of depressed, old dispersion, convex vascular / fibrous scar;
(6) Stretch marks.
- Similar Products
$940.00
1 Set (MOQ)
2024 Hottest 3D Skin Analyzer Facial Machine
Weifang Huamei Electronics Co., Ltd.