Swipe or use the arrows to view product images.
Xylitol Tri-Effect Three Effect Falling Film Evaporator
| Price | $90000.00 |
|---|---|
| Min Order | 1 Set |
| Availability | In Stock |
| Shipping From | Zhejiang, China |
| Popularity | 377 people viewed |
Model NO.:
HNJM series
Multi-Effect Evaporator:
3
Principle:
Regenerative Heat Exchanger
Structure Material:
Metal Material
Application:
Vaporizer, Heater, Condenser
Heat Transfer Surface:
Tubular Heat Exchanger
Trademark:
vnor
Transport Package:
Naked
Specification:
SGS/CE
Origin:
Wenzhou
Product Description
Xylitol solution from 12-16% to 55-60% used tri-effect falling film evaporator
If want to get more such as 81-83% we normally to central circulation pipe evaporator
And after cooling we can get the crystal
Characteristic:
A. The three effect falling film evaporator researched into, developed by our company is a high and new tech product among vast pharmaceutical equipments. It classified into 1000-50000kg/h series.
B. Material of contact: All made of stainless steel SUS304 material;
C. The equipment composed of one-effect, two-effect, three-effect heater, one-effect, two-effect, three-effect separator, preheater, composite condenser, hot press pump, vacuum pump, product pump, surge tank, electric cabinet, worktable and all pipelines and valves.
D. Low steam consumption, 1kg steam evaporate 3.5kg water.
E. Low evaporate temperature. Partial of indirect steam re-inhaled into one-effect heater by jet-type hot press pump can make full use of the heat and evaporate temperature are relatively lower.
F. Concentration factor big. Falling film evaporate can make the feed liquid with viscosity coefficient easy evaporate and no scale. The concentration time is short. The concentration ratio is 1: 5.
G. It can achieve automatic operation by control box consisted of electric power, product pump, vacuum pump, vacuum meter and temperature meter
If want to get more such as 81-83% we normally to central circulation pipe evaporator
And after cooling we can get the crystal
Characteristic:
A. The three effect falling film evaporator researched into, developed by our company is a high and new tech product among vast pharmaceutical equipments. It classified into 1000-50000kg/h series.
B. Material of contact: All made of stainless steel SUS304 material;
C. The equipment composed of one-effect, two-effect, three-effect heater, one-effect, two-effect, three-effect separator, preheater, composite condenser, hot press pump, vacuum pump, product pump, surge tank, electric cabinet, worktable and all pipelines and valves.
D. Low steam consumption, 1kg steam evaporate 3.5kg water.
E. Low evaporate temperature. Partial of indirect steam re-inhaled into one-effect heater by jet-type hot press pump can make full use of the heat and evaporate temperature are relatively lower.
F. Concentration factor big. Falling film evaporate can make the feed liquid with viscosity coefficient easy evaporate and no scale. The concentration time is short. The concentration ratio is 1: 5.
G. It can achieve automatic operation by control box consisted of electric power, product pump, vacuum pump, vacuum meter and temperature meter
- Similar Products