Swipe or use the arrows to view product images.
Yuanben Magnetic Guide Sensor Mgs-H16 Series Agv Sensor Who Si Magnetic FF
| Price | $1.00 |
|---|---|
| Min Order | 30 Pieces |
| Availability | In Stock |
| Shipping From | Shanghai, China |
| Popularity | 430 people viewed |
Model NO.:
MGS-H16
Principle:
Magnetic Sensors
Range:
0-3m
Measurement Accuracy:
0.1
Accuracy:
0.1%
Kind:
Liquid Level Transmitter
Structure:
All in One
Warranty:
1 Year
Certification:
CE
Material:
SS304
Process Temperature:
-20℃~80℃
Working Mode:
Unmanned
Driving:
Positive Operation
Falling Prevention Device:
Pull-Type
The Vehicle Inlet and Outlet:
Center
Design:
Single Post
Certification:
CE, ISO, CCC
Lift Mode:
Combination
Voltage:
DC 24V
Type:
Magnetic Guidance Sensor for Agv
Appliance:
Agv
Trademark:
yuanben
Transport Package:
Standard Export Package
Specification:
CCC
Origin:
Shanghai
HS Code:
9033000000
Product Description
MGS-H16 Magnetic Guidance Sensor for AGV appliance
1. Description
The Magnetic guiding sensor MGS-H16 developed by Yuanben, has a special made magnetic position sensor used to find small magnetic field (a magneic path is installed in the floor), and to keep the AGV heading direction continuously under control. The magnetic guidance sensors give signal about the AGV position deviations as the AGV passed the magnetic path, provides an output 16 BIT switches signal, turn at its magnetic path centre axis.
The sensor can guide vehicles with the help of small magnetic field installed along the magnetic guide path, in the floor. the AGV magnetic guide path is normally 50mm width and 1.0~1.5 thickness, the cost to install such guide path is a fraction of the cost of other type guide wire installation.
Magnetic guidance path can easily be installed in wood floors and other types of environment not well suited for guide wire installation.
2. Advantage
The MGS-H16 Magnetic guidance sensor has high accuracy by use of high quality components. A low cost is achieved by using a combination of standard components together with our standard control board. The system is easy to install and compact.
The magnetic guidance path in the floor may collect small magnetic particles and ferrous in the environment, this will however not cause any big problem under normal conditions.
3. Feature
Magnetic Tape Guidance AGV's route can be constructed in various locations, since the magnetic tape route can be constructed where the floor can not be carved. Modification of a magnetic tape route can be done easily and the route is durable against dust, water and light. MGS-H16 Magnetic Guide sensor detects the slight magnetic flux from a magnetic guide tape at operation distance 30mm (30mm to 40mm) and generates multiple switching signals, IP-65 housing is optionally available
4. Specification
5. Drawing
6. Photos
1. Description
The Magnetic guiding sensor MGS-H16 developed by Yuanben, has a special made magnetic position sensor used to find small magnetic field (a magneic path is installed in the floor), and to keep the AGV heading direction continuously under control. The magnetic guidance sensors give signal about the AGV position deviations as the AGV passed the magnetic path, provides an output 16 BIT switches signal, turn at its magnetic path centre axis.
The sensor can guide vehicles with the help of small magnetic field installed along the magnetic guide path, in the floor. the AGV magnetic guide path is normally 50mm width and 1.0~1.5 thickness, the cost to install such guide path is a fraction of the cost of other type guide wire installation.
Magnetic guidance path can easily be installed in wood floors and other types of environment not well suited for guide wire installation.
2. Advantage
The MGS-H16 Magnetic guidance sensor has high accuracy by use of high quality components. A low cost is achieved by using a combination of standard components together with our standard control board. The system is easy to install and compact.
The magnetic guidance path in the floor may collect small magnetic particles and ferrous in the environment, this will however not cause any big problem under normal conditions.
3. Feature
Magnetic Tape Guidance AGV's route can be constructed in various locations, since the magnetic tape route can be constructed where the floor can not be carved. Modification of a magnetic tape route can be done easily and the route is durable against dust, water and light. MGS-H16 Magnetic Guide sensor detects the slight magnetic flux from a magnetic guide tape at operation distance 30mm (30mm to 40mm) and generates multiple switching signals, IP-65 housing is optionally available
4. Specification
| Product Model | MGS-H-S-20-C20 |
| Product Number | MGS-H16 |
| Material Of Housing | PBT or Aluminum Case |
| Supply voltage | +24 VDC ±5%, ripple (p-p) 1% max. |
| Power consumption | 35mA max. (at DC+24V) |
| 70mA max. (at DC+12V) | |
| 75mA max. (at DC+5V) | |
| Digital type Output | NPN Transistor Open Collector Normally open Applicable voltage 30V max. Sink current 100mA max. |
| Operation Temperature | -10ºC to +50ºC (Non-freezing) |
| Operation Humidity | 35 to 95%RH (Non-condensing) |
| Prevent Class | IP65 |
| Storage Temperature | from -30 to +80ºC |
| Storage Humidity | from 35% to 95%RH (no condensation) |
| Target | MGT-50 -25 series magnetic guide tape |
| Operation Air Gap | 30 to 40mm (standard MGT-50-25) |
| Sensitivity | N-pole;6mT and over/ S-pole; 6mT and over |
| Element | 16 bits |
| Pitch | 10mm at even intervals |
| Logic | Normally open |
| Circuit | NPN open collector (DC30V, 50mA max.) |
| Residual voltage | 2V max. (at 50mA) |
| Response | 1ms |
| Insulation Resistance | 50MOhm |
| Connector | MIL-C-83503, 20Pin |
| Prevent circuit | Over-voltage and short circuit and reverse polarity protection |
| Mounting | Both Centre axis line of magnetic tape and sensor is Coincide |
| Appliance | AGV |
6. Photos
- Similar Products
$1200.00
1 Piece (MOQ)
Atex Approved 80GHz Radar Level Meter Transmitter Gauge - 60m
Zhuhai Microcreative Tech. Co., Ltd