Swipe or use the arrows to view product images.
Zhengzhou Factory Supply PDC Cutters 1304 1305 1308 1313 1907 1909 for Geology&Mining Drilling
| Price | $8.00 |
|---|---|
| Min Order | 50 Pieces |
| Availability | In Stock |
| Shipping From | Henan, China |
| Popularity | 491 people viewed |
Model NO.:
1304 1305 1308 1313 1907 1908 1909
Type:
Diamond
Classification of Diamond:
Polycrystalline Diamond Compacts
Characteristic:
High Hardness
Characteristics of Natural Diamond:
Compressive Strength
Synthesis of Cubic Boron Nitride Method:
Hthp
Application:
PDC Cutter for Geology&Mining Drilling
Product:
PDC Cutters
Advantage 1:
High Strength
Adantage 2:
High Hardness
Advantage3:
High Wearing Property
Trademark:
sino
Transport Package:
DHL, FedEx, TNT, EMS by Air
Specification:
1308, 1313, 1613, 1913
Origin:
China
Product Description
Introduction of PDC
PDC is sintered of diamond micro-powder and tungsten carbide substrate under high temperature and pressure. It has great wear resistance like diamond, as well as the high impact resistance like tungsten carbide, what's made it as the best drill bits' insert. Reinforced PDC has higher dense diamond powder, clawing tungsten carbide substrate made the two layers solid as a whole one.
Application
With high hardness, abrasion resistance and impact resistance, they are widely used for oil/gas drill bits, rock drill and coal mining drill bits, and also can be used for diamond tools for cutting, grinding, polishing.
Advantages
1.Optimized interface between diamond and tungsten carbide layers for excellent binding.
2.Penetration rate is improved by using high quality diamond powder which is self-sharpening.
3. Cutters can drill a precise round hole and reduce bit whirl as its force balanced design.
4. Gauge pads use tungsten carbide inserts for maximum wear resistance.
5. The diamond layer with thickness over 1 mm increases abrsion resistence of PDC cutter.
6.Good thermal stability.
PDC is sintered of diamond micro-powder and tungsten carbide substrate under high temperature and pressure. It has great wear resistance like diamond, as well as the high impact resistance like tungsten carbide, what's made it as the best drill bits' insert. Reinforced PDC has higher dense diamond powder, clawing tungsten carbide substrate made the two layers solid as a whole one.
Application
With high hardness, abrasion resistance and impact resistance, they are widely used for oil/gas drill bits, rock drill and coal mining drill bits, and also can be used for diamond tools for cutting, grinding, polishing.
Advantages
1.Optimized interface between diamond and tungsten carbide layers for excellent binding.
2.Penetration rate is improved by using high quality diamond powder which is self-sharpening.
3. Cutters can drill a precise round hole and reduce bit whirl as its force balanced design.
4. Gauge pads use tungsten carbide inserts for maximum wear resistance.
5. The diamond layer with thickness over 1 mm increases abrsion resistence of PDC cutter.
6.Good thermal stability.
Material: | PCD/diamond + tungsten carbide case | ||
Application | Oil Drilling, Marble Quarry Drilling | ||
Size | 1308/1313/1613/1913/1916 | ||
- Similar Products
$12.50
10 Pieces (MOQ)
High-Quality Kg PCBN Inserts for Roll Processing by Borja
Kaifeng Borja Superabrasives Co., Ltd.
$12.50
10 Pieces (MOQ)
Rcgv0907 CBN Inserts Processing Carbide Rolls
Kaifeng Borja Superabrasives Co., Ltd.
$12.50
10 Pieces (MOQ)
Non-Standard CBN Inserts for Processing Hard Materials
Kaifeng Borja Superabrasives Co., Ltd.
$8.50
10 Pieces (MOQ)
Sngn1207 CBN Inserts for Processing Quenched Steel
Kaifeng Borja Superabrasives Co., Ltd.
$8.50
10 Pieces (MOQ)
Sngn1204 CBN Inserts for Processing Sheet Body
Kaifeng Borja Superabrasives Co., Ltd.
$12.50
10 Pieces (MOQ)
Dcgw/Ccgw/Tcgw for Processing Materials
Kaifeng Borja Superabrasives Co., Ltd.
$8.50
10 Pieces (MOQ)
Cngn120408/Ccgw09t304 for Processing Gear
Kaifeng Borja Superabrasives Co., Ltd.
Negotiable
10 Pieces (MOQ)
Sngn1207 CBN for Processing Quenched Steel
Kaifeng Borja Superabrasives Co., Ltd.