Swipe or use the arrows to view product images.
Blow Moulding Machine/Blow Molding Machine/Circuit Board/Board/Input & Output/I/O/I/O Board/Io Circuit Board/Io32 PCB/Io32 Iopcb/Io32 Circuit Board
| Price | Negotiable |
|---|---|
| Min Order | 1 Piece |
| Availability | In Stock |
| Shipping From | Jiangsu, China |
| Popularity | 538 people viewed |
Model NO.:
IO32
Task:
Adjust
Structure:
Combination
Mathematical Model:
Linear
Signal:
Continuous
Function:
Automatic Control
Certification:
RoHS, CCC
Condition:
New
Customized:
Customized
Material:
Plastic
Trademark:
KAIDOO
Transport Package:
Box
Specification:
I/O32
Origin:
China
HS Code:
84779000
Product Description
I/O 32 INPUT AND OUTPUT CIRCUIT BOARD IS SUITABLE TO AUTOMATIC BLOW MOULDING MACHINE ;
The working principle of the circuit board is to use the board-based insulation material to isolate the open surface copper foil conductive layer, so that the current flows along the pre-designed route in various components to complete functions such as work, amplification, attenuation, modulation, demodulation, coding and so on. The circuit board is mainly composed of pads, vias, mounting holes, wires, components, connectors Waterfer circuit board thin film line SMT chip Waterver circuit board thin film line SMT patch, filling, electrical boundary, etc., the main functions of each component are as follows:
Pad: A metal hole used to solder component pins.
Vias: There are metal vias and non-metallic vias, where metal vias are used to connect component pins between layers.
Mounting hole: Used to secure the board.
Wires: An electrical network copper film used to connect component pins.
Connector: A component used to connect between boards.
Filling: Copper coating for ground networks can effectively reduce impedance.
Electrical boundary: Used to determine the size of the board, which cannot be exceeded by all components on the board.
The working principle of the circuit board is to use the board-based insulation material to isolate the open surface copper foil conductive layer, so that the current flows along the pre-designed route in various components to complete functions such as work, amplification, attenuation, modulation, demodulation, coding and so on. The circuit board is mainly composed of pads, vias, mounting holes, wires, components, connectors Waterfer circuit board thin film line SMT chip Waterver circuit board thin film line SMT patch, filling, electrical boundary, etc., the main functions of each component are as follows:
Pad: A metal hole used to solder component pins.
Vias: There are metal vias and non-metallic vias, where metal vias are used to connect component pins between layers.
Mounting hole: Used to secure the board.
Wires: An electrical network copper film used to connect component pins.
Connector: A component used to connect between boards.
Filling: Copper coating for ground networks can effectively reduce impedance.
Electrical boundary: Used to determine the size of the board, which cannot be exceeded by all components on the board.
- Similar Products
Negotiable
1 Piece (MOQ)
Pn3070 Pressure Sensor Transducer with Display for Ifm
Sichuan Hongjun Science and Technology Co., Ltd.
$999.00
1 Piece (MOQ)
Maxsine IP20 Slim High Performance Servo Drive
Suzhou Conversion Technology Co., Ltd.