Menu
Suppliers Products
Global B2B sourcing platform
Verified suppliers and manufacturers
MadeInChina.com > Industrial Equipment & Components > Pump & Vacuum Equipment > Centrifugal Pump
Swipe or use the arrows to view product images.

Canned Motor Pump RS32/4 (6) (8) -180mm

Price Negotiable
Min Order 5 Pieces
Availability In Stock
Shipping From Beijing, China
Popularity 332 people viewed
Send Inquiry View Full Page
Model NO.:
RS32/4 (6) (8) -180mm
After-sales Service:
N/a
Warranty:
One Year
Max.Head:
8
Max.Capacity:
100
Driving Type:
Motor
Impeller Number:
Single-Stage Pump
Working Pressure:
Middle Pressure Pump
Influent Type of Impeller:
Single Suction Pump
Position of Pump Shaft:
Horizontal Pump
Pump Casing Combined:
Horizontal Split Pumps
Mounting Height:
Suction Centrifugal
Impeller:
Closed
Usage:
Pump, Pumps, Circulating Pump
Trademark:
osthohen
Origin:
China
HS Code:
8413709990
Product Description
 RS32/4 -180mmRS32/6- 180mmRS32/8- 180mm
Power source1~220V/50Hz1~220V/50Hz1~220V/50Hz
Input power P1 (W)70/60/4093/67/46151/113/81
Current I (A)0.32/0.28/0.180.40/0.30/0.200.76/0.60/0.40
Motor type78/5078/5078/80
    
Approved fluidsClean waterClean waterClean water
Fluid temp (ºC) -10~+110 -10~+110 -10~+110
    
Total head (m)468
Max flow (l/min)5560100
Rated flow (l/min)354055
Rated head (m)2.535
Inlet size (mm)323232
Outlet size (mm)323232
inlet-outlet distance(cm)180180180
Max pressure (bar)101010
Protection classIP44IP44IP44
Weight (kg)2.22.44.0
    
CartridgeStainless SteelStainless SteelStainless Steel
ImpellerPlasticPlasticPlastic
ShaftCeramicCeramicCeramic
CasingCast ironCast ironCast iron


the series pump is wet runner motor pump integrated the pump and motor, the impeller and the rotor is canned by cartridge and isolated from the stator. No mechanical seal used and only sealed by two gaskets. Bearings are lubricated by transferring liquid and motor is cooled by transferring liquid too. No leakage and low noise are two distinctive advantages for wet runner canned motor pump.


The circulation pumps are characterised by
  1. Ceramic shaft and radical ceramic bearings
  2. Carbon thrust bearing
  3. Stainless steel rotor cartridge and bearing flange
  4. Corrosion-resistant plastic impeller
  5. Cataphoresis cast iron or engineering plastic pump housing
Motor insulation class H and integrated with thermal protector; Three speed selection motor; Terminal box position: 3h/6h/9h/12h easy for different installation ways. Easy-open terminal box with cable gland for easy electrical connection and keep sealing.
  • Similar Products
Full Page Contact Supplier
↑