Laboratory Vacuum Emulsifier Mixer Machine

Laboratory Vacuum Emulsifier Mixer Machine 



Main structural description:
The ZJR-10L vacuum homogenization emulsifying unit consists of a main pot, an oil pot, a water pot, an electrical control system, a vacuum system, and a frame.
The main pot consists of a homogenizing and stirring pot, a homogenizing mechanism, a stirring mechanism, and other parts.
2. Working principle:
The material is first preheated and stirred in water and oil pots, and then directly sucked into the homogenization pot under vacuum through the conveying pipeline.
The material is stirred in a homogeneous pot using a polytetrafluoroethylene scraper (which always conforms to the shape of the pot and sweeps away the wall sticking material), constantly creating new interfaces. Then, it is sheared, compressed, and folded by a frame mixer to mix and flow downwards towards the homogenizer below the pot. The material is then cut in the shear joint by the strong shearing, impact, turbulence, and other processes generated between the high-speed rotating rotor and stator, quickly breaking into particles of 200nm to 2 μ m. Material granulation, emulsification, mixing, blending, and dispersion can be completed in a short period of time. Due to the vacuum state inside the homogenization pot, the bubbles generated during the mixing process of the material are promptly removed. After homogenization is complete, raise the lid of the homogenization pot and rotate the pouring handwheel to discharge the materials inside the pot into the outer container.
The heating temperature of the homogenization pot is set and adjusted through the temperature controller on the control panel; Homogeneous stirring and blade stirring can be used separately; It can also be used simultaneously; The length of homogenization mixing time is determined by the user based on the different properties of the material. After finishing the work, you can open the cleaning ball valve to clean the pot body.
Product Name: ZJR-10 Vacuum Emulsifying Mixer

Keyword: Emulsifying Mixer, vacuum emulsifying mixer

Introduction: The pot cover is automatic rising type, the material was directed fed into the emulsifying boiler from oil boiler and water boiler.

Technical Feature: The cover of main boiler tank can be lifted and lowed automatically. It is equipped with upper homogenizer and the tilting discharging method can be fully assured the material completely out.

Applications:

It is suitable for making cream or ointments in laboratory of pharmaceutical, fine chemical or
Cosmetic factory for R&D.