Audited Supplier
AK24-A04
ISO
AC/DC 24V
Electric Power
Ordinary Temperature
Other
Other
Winvall
Carton with Pallet
4N. m
China
Product Description
DescriptionThis actuator is suitable for circular spindle with size 10-18mm dia, or square spindle size with 6-12mm dia, length larger than 40mm. The rotating direction can be reversed by changing the CCW/CW swith side of the actuator. Output torque could be 4 N.m to control air space around 0.5 -1 square meters with 3-point controlling way.
Technical data:
Run time :60...90s Operating power :12VA,2W
Ambient conditions :-10...+55oC 0...90% RH Output angle :90° (95° Max)
Feedback signal (TF/TS...P) :10k ohm Potentiometer (1W)
Function:
a. Make a turn actuated by electric signal(e.g. FromHVAC) within 0-90°( 93°mechanically) .
b. Angle of rotation can be set freely .
c. Universal coupling is fit for round shaft from
10...18mm in diameter and square shaft from
6...12 mm.
d.Auto/manual switch which can be transferred freely.
1. Installation are for use by qualified personnel only.To avoid injury and electric shock, do not perform
any servicing other than that contained in this manual.
2. All actuators are shipped from the factory ready for installation; no electrical adjustments are required before placing them in operation.
3.Check the connections before energizing the power supply since wrong connections can damage the equipment.
4.The actuator should be stored in its shipping carton in a clean, dry area.
