Titanium TA2 0.25mm Wire Mesh Demister Pad

Titanium TA2 0.25mm Wire Mesh Demister Pad

1. Titanium Anti Corrosive Metal Mesh Wire Mesh Demister

Demister pads or Mist eliminators are porous blankets of metal or plastic knitted wire mesh, designed and constructed for the efficient, economical removal of entrained liquid droplets from vapor streams. Demister Pads can be fabricated in any required size and shape and may be installed in new or existing process vessels.

2. Titanium Anti Corrosive Metal Mesh Wire Mesh Demister Advantages:
 

1. Simple installation;

2. Low pressure loss;

3. 90% to 99.9% efficiency;

4. Little maintenance is required;

5. Elimination of liquid product loss;

6. Essential improvement of vapor phase quality;

7. Dimensions and configurations are not limited;

8. Contacting surface area is larger than the specific gravity;

9. Compact equipment can be used in accordance with increased production capacity;

10. No direct power is required since the equipment has no operating parts

3. Titanium Anti Corrosive Metal Mesh Wire Mesh Demister Aplications:

• Reduce loss of valuable chemicals: demister pads markedly cut glycol, amine, or solvent consumption in absorption and regeneration towers.
• Increase throughput capacity: demister pads allow a significant increase in throughput anywhere gases and liquids come into contact in process equipment.
• Improve product purity: demister pads prevent contamination of side draws and overheads in refinery atmospheric and vacuum towers and other distillation columns.
• Minimize contamination: demister pads can prevent the poisoning of expensive downstream catalysts or provide boiler feed water quality condensate from evaporator overheads.
• Provide equipment protection: demister pads protect turbine, blower, and compressor blades, which can eliminate serious maintenance problems.
• Reduce air pollution: demister pads help diminish droplet emissions to environmentally acceptable levels.

4. Titanium Anti Corrosive Metal Mesh Wire Mesh Demister's specifications:

5. How Titanium Anti Corrosive Metal Mesh Wire Mesh Demister Works?

When vapor and entrained liquid droplets pass through a mist eliminator, the vapor moves freely through the mesh pad but the liquid droplets, due to their greater inertia, cannot make the necessary sharp turns and as a result are thrown into contact with the wire surfaces and briefly held there. As more droplets enter the pad and collect on the wires, they grow in size, run down the wire to the bottom surface of the mesh separator and fall from the unit. Overhead vapor is now free of entrained liquid.