Audited Supplier
SCB10
Power, Rectifier
Three
Core-type Transformer
Dry-type Transformer
Two-winding Transformer
ISO9001-2000, ISO9001
Single-phase Transformer, Rectifier Transformer, Combined Transformer, Power Transformer, Distribution Transformer
Power Frequency
EE
50/60Hz
15~2500kVA
0.22~35kv
Three Phases
Cold Rolled Grain Oriented Silicon Steel Sheet
Copper/Aluminum Coil
Plywooden
Indoor
According to Customers' Requirements
IEC
zhibo
Plywood
L*W*H
Guangdong China
Product Description
All kinds of Dry-type Transformers are especially applicable for Power plant, High-rise Building, Business Center, Vessel, Port, Station Airport, Petrochemical Plant Railway, Tunnel, Mine Underground, Urban Centralized Residential Quarter which is high demand for fireproofing, explosion proofing antipollution.
Product Description:
Product Features:
Technical parameter:
Company Profile:
Certification:
Our Factory:
Business Cooperation:
Logistics Delivery:
Product Description:
Fireproof, long service life, maintenance is free, safe and reliable, suitable for hotel, high-rise buildings, commercial centers, residential quarters, stadiums, factories, airports, ports, subway, mines and other places.
Product Features:
- High strength of the whole mechanical cast coil and well withstand sudden short-circuit.
- Strong capability of moisture-proof anti-corrosion, especially suit for working in extreme hard environmental condition, can put into operation without drying process.
- PD small, long service life. As for the coil is casted by vacuuming and under the condition of "positive pressure", so there is no air bubbles between inter-turn and inter-layer, greatly reducing the amount of partial discharge. In addition, the intensity of machine is supper great after epoxy-resin, strong capacity of resistance to sudden short-circuit.
- With impeccable temperature protection and housing guards, has provided a guarantee for the safe and reliable operation of product.
- Coil design and manufacturing:
- Core manufacturing:
| GENERAL TRANSFORMER SPECIFICATION | |||
| GENERAL SPECIFICATION | |||
| TRANSFORMER TYPE | dry type, cast resin | ||
| INSTALLATION | indoor | ||
| APPLICABLE STANDARDS | IEC 60076-1 | ||
| RATED POWER | AN | kVA | 63/80/100kva |
| HIGH VOLTAGE | kV | 0.4 | |
| HIGH VOLTAGE TAPPINGS (NO LOAD) | % | kV | ±2x2.5 |
| LOW VOLTAGE ( NO LOAD) | kV | 0.4 | |
| HIGH VOLTAGE INSULATION LEVEL | (Um/UAC/ULI) | kV | |
| LOW VOLTAGE INSULATION LEVEL | (Um/UAC/ULI) | kV | 1 , 1 / 3 / -- |
| FREQUENCY | HZ | 50 or 60 | |
| VECTOR GROUP | Dyn11 or Yyn0 | ||
| NUMBER OF PHASES | 3 | ||
| MAX. AMBIENT TEMPERATURE | C | 40 | |
| MAX. TEMPERATURE RISE | C | 100 | |
| MAX. ALTITUDE ABOVE SEA LEVELL | m | 1000 | |
| PERMISABLE SHORT CIRCUIT DURATION | s | 2 | |
| GUARANTEED VALUES | |||
| IMPEDENCE VOLTAGE (120C) | ±10% tolerance | % | 4 |
| NO LOAD LOSSES | ±10% tolerance | W | |
| LOAD LOSSES (120C) | ±10% tolerance | W | |
| STRUCTURAL SPECIFICATIONS | |||
| HIGH VOLTAGE WINDING CONDUCTOR MATERIALS | Cu | ||
| LOW VOLTAGE WINDING CONDUCTOR MATERIALS | Cu | ||
| ENCLOSURE | depends on the requirement | ||
| DIMENSION and WEIGHT | |||
| LENGTH /WIDTH / HEIGHT | mm | L / W / H | |
| TOTAL WEIGHT | kg | ||
| ACCESSORIES | |||
| COOLING FANS | |||
| TEMPERATURE CONTROLLER | |||
| ENCLOSURE | |||
| LIFTING LUGS | |||
Company Profile:
There are a number of design experts in our company who could design according to the specific conditions of the equipment used by various steel companies, and they are well experienced in the design of special rectifier transformers and other products for power supply power transformers used in steel rolling projects. It can also ensure that the design has sufficient large load short-term overload tolerance. For the design and manufacturing process of rectifier transformers, we pay more attention to the factors that may occur due to the frequent impact of current and voltage for a long time due to the steel rolling process. It is clearly stipulated: "Designers are also supervisors in the production process" to ensure that the supplied equipment satisfying continuous production of steel rolling operations.
The guarantee of product process quality not only depends on the design and manufacturing process, also on advanced production equipment, perfect testing methods and well experience production technicians.
The guarantee of product process quality not only depends on the design and manufacturing process, also on advanced production equipment, perfect testing methods and well experience production technicians.
Certification:
Our Factory:
Business Cooperation:
Logistics Delivery:
