0~5V Capacitive Fuel Level Sensor, 200-2000mm, Flange Mount, No Float, Customizable

Price $60.00 Compare
Min Order 1 Piece
Availability In Stock
Shipping From Guangdong, China
Popularity 442 people viewed
Quantity
+-
 

Dongguan Dalang Aoer Sensor Co., Ltd.

VIP   Audited Supplier 1 year
Profile Certified by SGS/BV
Capacitance
Contact
4-20mA or 0-5V
Corrosion Resistant
Aluminum
IP65
Customized
Threaded
Flange
Safe-Package
China
Product Description
Product Description

 

What is a capacitive liquid level sensor?

The capacitive liquid level sensor is a liquid level sensor based on the principle of capacitive sensing.
When the height of the measuring electrode changes by the measured medium, it causes its capacitance to change.

The Capacitive liquid level sensor can convert the changes of various levels, liquid level, and medium height into standard current signals, which are remotely transmitted to the operation control room for secondary instruments or computer devices for centralized display, alarm, or automatic control.

Capacitive liquid level sensor with good structure and installation method can be applied to high temperature, high pressure, strong corrosion, easy to crystallize, anti-clogging, anti-freezing, and solid powder and granular materials.


 

Detailed Photos

 



How to connect the wires?


How to cut and re-assembly a capacitive liquid level sensor?

amark the cutting point
bremoval of bottom plug
ccutting to the reduced-length needed
please note:  tube should be protected by cushion to prevent from tube deformation
dto de-burr, and finishing on appearance
ere-assembly of bottom plug

How to calibrate a capacitive liquid level sensor after cutting length?

aCalibration for "EMPTY"put sensor at open air (after cut)
bpower-on 24VDC
cto short Yellow & Black for at least 5 sec.
(all the above should be in air)
dwill see 0Vdc at output
 
eCalibration for "FULL"put the sensor into the agent
please note: sensor should be dipped to the agent
fto short Yellow & Red for at least 5 sec.
gwill see 5Vdc at output
(Step 6 & 7 should be in liquid, same as agent in tank)


  • Contact Supplier
Message Type
* Message Content
* Name  
* Phone
* Email
* CAPTCHA  
$60.00 1 Piece(MOQ)

4-20mA Signal Capacitive Fuel Level Sensor Without Float, 200-2000mm Length, Flange Mount

Dongguan Dalang Aoer Sensor Co., Ltd.
$0.15 1500 Pieces(MOQ)

2*14mm Normally Open Magnetic Reed-Switch for Door Contact/Liquid Level Sensor

Dongguan Dalang Aoer Sensor Co., Ltd.
$60.00 1 Piece(MOQ)

900mm Capacitive Fuel Level Sensor, RS232 Output, Threaded, Cuttable & Calibratable

Dongguan Dalang Aoer Sensor Co., Ltd.
$2.99 10 Pieces(MOQ)

NPT 1" NPT2'' NPT1.5'' Thread Liquid Water Fuel Oil Genset Diesel Bio-Diesel Holding Tank Level Alarm Switch with NBR Float

Dongguan Dalang Aoer Sensor Co., Ltd.
$200.00 1 Piece(MOQ)

Precision Bilge Level Sensors for Oil and Water Management

Taizhou Jiabo Intrument Technology Co., Ltd.
$45.00 1 Piece(MOQ)

Atex Explosion Proof IP68 Submersible Water Level Sensor for Deep Well

ANHUI WNK ELECTRONIC ENGINEERING CO., LTD.
$45.00 1 Piece(MOQ)

4~20mA/0-10V/0-5V Immersion Submersible Hydrostatic Underground Water Level Sensor

Hefei WNK Smart Technology Co., Ltd.
$30.00 60 Pieces(MOQ)

Oil Tank's Common-Used Compoents, Oil Level Sensor. Factory Direct Selling

Jinan Deka Auto Technology Co., Ltd
$3.20 500 Pieces(MOQ)

Mechanical Float Switch for Water Pump Liquid Level Sensor

JINSHI TECHNOLOGY (ZHEJIANG) CO., LTD.
Negotiable 500 Pieces(MOQ)

Ah3513 Linear Hall Effect Sensor

Nanjing AH Electronic Science & Technology Co., Ltd.