Audited Supplier
RTGM75
Motor, Center Pivot Irrigation System
Hardened Tooth Surface
Horizontal Type
Expansion
Conical - Cylindrical Gear
Double-Step
Gear Reducer
0.75HP
40:1 or 50:1
460V, 60Hz / 380V, 50Hz
RainTek or OEM
Wooden Pallet
0.75HP
China
Product Description
RainTek 0.75HP Gear Motor & Center Drive for Valley, Zimmatic Pivots Replacement
Replacement of Valley, Zimmatic, Pierce, and other Brands Center Pivot & Lateral Move Irrigation System.
Features
1. Available in 3 phase.
2. Aluminum finned stator housing for cooler running temperature.
3. The same with durst and omini gear motor.
4. Helical spur gear design available in multiple ratios.
5. All gears are heat treated.
6. High strength steel shafting for long life and dependability.
7. Thermally protected with automatic reset located in the easily accessible junction box.
8. CCC, CE, and UL certified.
9. Dual shaft seals.
FAQ
Q1. Do you offer samples?
A1: Yes. You can buy 2-5 pcs sprinklers as your first order to check the quality.
Q2. What's the sprinkler's material?
A2: Normally, we can provide PP, POM, ABS, Nylon material. All depend on your requirement.
Q3. Can you provide OEM or ODM service?
A3: Yes. Based on years' experience manufacturing sprinklers and we have the designer team, we accept both OEM and OEM service.
Q4. Tell me your company's strength, because I want to place an order to you?
A4: RainTek's team has a long-time experience in the irrigation industry and we committed to providing high-quality irrigation products in the global market. We have 10 sets plastic injection machines which can supply about 15000 pcs sprinklers per day.
Q5. Can I get any discount?
A5: The price is negotiable, we can offer you discount according to the order quantity.
Q6. Can I use this sprinkler as the end gun for center pivot irrigation system?
A6: Yes. Actually, it can be used for both center pivot and hose reel irrigation system also can be used for dust control.
Q7. What brands center pivot irrigation system can use these sprinklers?
A7: RainTek can provide replacement parts for Valley, Zimmatic, Reinke, Pierce and other brands center pivot.
Q8. What kinds of center pivot components can you provide?
A8: RainTek can provide drive-train parts(gear motor, gearbox, coupler...), sprinklers(I-Wob, D3000, R3000...), the spray gun(skipper, 101, 140...), electrical parts(collector ring, tower box, timer...), water distribution parts(gasket, boot hose, drain...), and other fittings.
Q9. What's the delivery method and cost?
A9: Both by air and by sea are ok. Freight cost depends on the commodity weight, volume, and your destination.
IF IT'S DIFFICULT FOR YOU TO CHOOSE THE CORRECT GEAR MOTORS, PLEASE CONTACT US!
| Part No. | Power | Frequency | Input RPM | Output RPM | Ratio | Torque |
| RTGM75-01A | 0.75HP | 460V 60HZ/380V, 50HZ | 1720/1420 | 43/35 | 40 | 119N.m |
| RTGM75-01B | 0.75HP | 460V 60HZ/380V, 50HZ | 1720/1420 | 34/28 | 50 | 150N.m |
Features
1. Available in 3 phase.
2. Aluminum finned stator housing for cooler running temperature.
3. The same with durst and omini gear motor.
4. Helical spur gear design available in multiple ratios.
5. All gears are heat treated.
6. High strength steel shafting for long life and dependability.
7. Thermally protected with automatic reset located in the easily accessible junction box.
8. CCC, CE, and UL certified.
9. Dual shaft seals.
FAQ
Q1. Do you offer samples?
A1: Yes. You can buy 2-5 pcs sprinklers as your first order to check the quality.
Q2. What's the sprinkler's material?
A2: Normally, we can provide PP, POM, ABS, Nylon material. All depend on your requirement.
Q3. Can you provide OEM or ODM service?
A3: Yes. Based on years' experience manufacturing sprinklers and we have the designer team, we accept both OEM and OEM service.
Q4. Tell me your company's strength, because I want to place an order to you?
A4: RainTek's team has a long-time experience in the irrigation industry and we committed to providing high-quality irrigation products in the global market. We have 10 sets plastic injection machines which can supply about 15000 pcs sprinklers per day.
Q5. Can I get any discount?
A5: The price is negotiable, we can offer you discount according to the order quantity.
Q6. Can I use this sprinkler as the end gun for center pivot irrigation system?
A6: Yes. Actually, it can be used for both center pivot and hose reel irrigation system also can be used for dust control.
Q7. What brands center pivot irrigation system can use these sprinklers?
A7: RainTek can provide replacement parts for Valley, Zimmatic, Reinke, Pierce and other brands center pivot.
Q8. What kinds of center pivot components can you provide?
A8: RainTek can provide drive-train parts(gear motor, gearbox, coupler...), sprinklers(I-Wob, D3000, R3000...), the spray gun(skipper, 101, 140...), electrical parts(collector ring, tower box, timer...), water distribution parts(gasket, boot hose, drain...), and other fittings.
Q9. What's the delivery method and cost?
A9: Both by air and by sea are ok. Freight cost depends on the commodity weight, volume, and your destination.
IF IT'S DIFFICULT FOR YOU TO CHOOSE THE CORRECT GEAR MOTORS, PLEASE CONTACT US!
