Audited Supplier
WR-01
CE, SGS
Turbine Oil, Lubricant Oil, Engine Oil
380V
200 L/min
Crude Oil
Gasoline, Diesel, Base Oil
Crude Oil separation
200 Tons Per Day
WR
Thin Film Plastic
as capacity
China
84194090
Product Description
The main products are as follows:
Naphtha--as a catalytic reforming raw material.
First side oil line of atmospheric column--As a raw material for aviation kerosene hydrogenation.
second side oil line of atmospheric column--As a raw material for diesel hydrogenation.
Third side oil line of atmospheric column--As a raw material for diesel hydrogenation.
Vacuum column top line oil--As a raw material for diesel hydrogenation.
Vacuum column first line oil--As a raw material for diesel hydrogenation.
Vacuum column second line oil--As wax oil hydrogenation/cracking raw material.
Vacuum column third line oil--As wax oil hydrogenation/cracking raw material
Vacuum column fourth line oil--As wax oil hydrogenation/cracking raw material
Vacuum residual oil--As a raw material of heavy oil catalytic/coking/dissolving/oxidizing asphalt
Second, Raw materials and products
1.Material properties:
The raw material is based on the crude oil data sent by the customer and the evaluation made,The basic properties of raw materials are as follows:
Real boiling data:
Naphtha--as a catalytic reforming raw material.
First side oil line of atmospheric column--As a raw material for aviation kerosene hydrogenation.
second side oil line of atmospheric column--As a raw material for diesel hydrogenation.
Third side oil line of atmospheric column--As a raw material for diesel hydrogenation.
Vacuum column top line oil--As a raw material for diesel hydrogenation.
Vacuum column first line oil--As a raw material for diesel hydrogenation.
Vacuum column second line oil--As wax oil hydrogenation/cracking raw material.
Vacuum column third line oil--As wax oil hydrogenation/cracking raw material
Vacuum column fourth line oil--As wax oil hydrogenation/cracking raw material
Vacuum residual oil--As a raw material of heavy oil catalytic/coking/dissolving/oxidizing asphalt
Second, Raw materials and products
1.Material properties:
The raw material is based on the crude oil data sent by the customer and the evaluation made,The basic properties of raw materials are as follows:
| Project analysis | Numerical | ASTM |
| APIºC | 35 | CHACT |
| Density,g/cm3 15ºC | 0.8490 | D-5002 |
| Viscosity, mm2/s, 80ºF | 6.864 | D-445 |
| Pour point, ºC | -27 | D5853 |
| Ash, % | 0.0082 | D-482 |
| acidity, mg KOH/g | ||
| Salt content, PPM NaCl/l | 4.0 | D-3230 |
| sulfur %Mass | 0.574 | D-4294 |
| asphaltene %Mass | 1.75 | D-6560 |
| Hydrogen sulfide, ppm | 7.0 | B. P |
| water %VOL | 0.05 | D-4007 |
| Characterization factor K | ||
| Crude oil category |
Real boiling data:
| Test standard | ASTM-D86 |
| Temperature(ºC) | Yield coefficient(%) |
| L B P (47) | |
| 50 | 0.1 |
| 75 | 3.8 |
| 100 | 8.5 |
| 125 | 14.5 |
| 150 | 20.0 |
| 175 | 26.0 |
| 200 | 31.5 |
| 225 | 36.5 |
| 250 | 41.0 |
| 275 | 45.0 |
| 300 | 49.0 |
| Total yield | 50 |
| loss | 0.5 |
