Audited Supplier
1.2080 SKD1 Forged Cold Work Tool Steel D3 Cr12 Bar
Equivalent Grade:
Standard | Grade |
AISI/SAE | D3 |
W.Nr/DIN | 1.2080 |
JIS | SKD1 |
GB | Cr12 |
Typical Chemical Composition (%)
C | Si | Mn | Cr |
1.90-2.20 | 0.10-0.40 | 0.15-0.45 | 11.00-12.00 |
Hot Forming:
Forging: 1050 to 850ºC, slowing cooling in furnace.
Heat Treatment:
Annealing: 800 to 850ºC, slow cooling in furnace (10-20ºC/hr), down to approx. 600ºC, cooling in air. Hardness after annealing: max. 250HB.
Stress relieving: approx. 650ºC, slow cooling in furnace. Hold in neutral atmosphere for 1 to 2hours.
Hardening: 930 to 960ºC, oil, salt bath(220 to 250ºC or 500 to 550ºC), quenching in forced air, for thickness up to 30mm. Hardness obtainable, 63 to 64 HRC.
Tempering: As required. Slowly heating to tempering temperature right after hardening. Recommended to temper 2 or 3 times to increase toughness.
Tempering ºC | 200 | 300 | 400 | 500 | 600 |
HRC | 63 | 60 | 58 | 55 | 48 |
* Hardening temperature: 950ºC, specimen size: dia25mm
Properties:
Classic high chromium cold work steel. High wear resistance due to its ledeburitic structure, very good deep hardening properties and dimensional stability. Moderate toughness.
Applications:
High performance blanking and punching dies for sheet thickness up to 3 mm; circular and flat shear blades for sheet thickness up to 2 mm; cold drawing tools, broaches; tools for the production of nails, screws, nuts and rivets; cold extrusion tools; cold hobbing tools; flanging rolls; guide rolls; rollers of all shapes for continuous production of steel tubes and profiles; cold forming tools for ceramics and powder metallurgy and similar tools.
Available Size:
| Round: | Dia 2-12mm | Cold Rolled | ||
| Dia 12-200mm | Hot Rolled | |||
| Dia 50-600mm | Hot Forged | |||
| Flat/Suare: | Thickness | 1-2.5mm | Cold Rolled | |
| 12-200mm | Hot Rolled | |||
| 20-500mm | Hot Forged | |||
| Width | 800mm Max. | |||
FAQ
Q1: Are you a manufacturer or merely a trader?
A1: We are not only a stockist of Hot rolled products but also a manufacturer of forged products with our own Forging Mill
Q2: What do you do to control the quality?
A2: Before loading, our products will all be inspected by ultrasonic inspection. Quality Grade conforms to SEP 1921-84 E/e, D/d, C/c as per the customer's request.
Q3:: What are your hot-selling products?
A3: S50C, 1.2311, D2/1.2379, H13/1.2344, CR12MOV, DC53, CR8, abundant stock for both plates and rounds. Competitive prices and short lead-time.
Q4: Can we visit your company and factory?
A4: Yes, warmly welcome! We will book the hotel and assign our driver to pick you up at the airport when you visit.
