Audited Supplier
Non-Customized
Standard Component
Copper
Electronic Drainer
Integrated Type
16bar
160 Ml/S
Oil-Containing Condensate
1-60 Degree
RC1/2"
Direct Acting Solenoid Valve
3.2 mm
Yes
IP65
SUNWIN
Carton
175*110*57mm
Shanghai
Product Description
Suitable for any flow range and pressure up to 16bar (230 PSI), the drainer is perfect for virtually any compressed air application, especially those with solid particulate contaminants.
With a test button, LED on/off indication and a full serviceable direct acting valve, the drainer offers affordable, reliable condensate management without the need to install additional valves and strainers. Use it on any compressor, receiver, filter or refrigerated dryer. The saves installation time and protects against large particles found in condensate, thanks to the integrated ball valve and strainer. The unit can be shut off from the compressed air system, enabling easy and safe work to be carried out.
Integrated mesh strainer, offering valve and orifice protection from larger particles found in condensate.
Integrated shut off valve, offering easy shut off of the valve for routine maintenance.
Correct electronic timer controlled
Any type of compressed air systems and up to 16 bar(40bar 80bar 100bar)
No air-lock during operation
TEST Button feature
Any type of compressed air systems and up to 16 bar(40bar 80bar 100bar)
No air-lock during operation
TEST Button feature
| Product model | SRPT-16A | SRPT-16B |
| Product features | Split type(L-type) | Integrated type(line-type) |
| Timer cycle range (ON/OFF) | ON:0.5 - 10 Sec. OFF:0.5 - 45 Min. | |
| Rated working pressure | 0-1.6Mpa | |
| Discharge capacity at 0.8Mpa | About 160 ml/s | |
| Applicable media | Water,Oil-containing condensate | |
| Temperature of medium | 1-60ºC | |
| Temperature of ambient | 1-60ºC (Heating model is optional for sub-zero temperature) | |
| Inlet/Outlet of ball valve strainer | Inlet:Male R1/2'' Outlet:Male R1/2'' | / |
| Inlet/Outlet of solenoid valve | Inlet:Female Rc1/2'' Outlet:Female Rc1/2'' | Inlet: Male R1/2'' Outlet:Female Rc1/2'' |
| Type of discharge valve | Direct acting solenoid valve | |
| Valve orifice | 3.2 mm | |
| Front mesh strainer of discharge valve | Yes(Outer set) | |
| Front mesh strainer of discharge valve | Brass | |
| Manual function | Yes | |
| Protective class | IP65(After correct assembling) | |
| Supply voltage options | 24-380 VAC/DC 50/60Hz Optional | |
| Overall dimensions L* W * H | 86×90×111 | 92×90×122 |
| N.W. | 575 g | 515 g |
