Audited Supplier
GEL-1
Fiber & Garment, Footwear & Leather, Packing, Woodworking
Instant Adhesive
Clear
Organic Material
Solvent
Instant Adhesive
Solvent
Automobile, Construction, Woodworking, Footwear & Leather, Fiber & Garment, Packing, Bonding Porous or Absorbent Materials
Acrylic
Room Curing
Stabilizer
Organic Material
Clear
7085-85-0
C6h7no2
230-391-5
Ethyl-Cyanoacrylate
Weatherablity and Waterproof
15 Months
100000 Cps
Over 10 MPa
10 - 30 Seconds
30 Minutes
0.045m3/CTN
-30 to 95 C
57*36*150mm
390X330X365mm
4.5 Kgs
4 Kgs
0.0463 M2
Juju, Ever, Okebond, or OEM
Paper CTN
3g 1pcs/card 24cards/boxes 12boxs/ctn
China
35069900
Product Description
About OkeBond®
In new energy Automobile
Adhesive and automatic dispensing equipment field
OKEBond® is your trusted professional partner
In new energy Automobile
Adhesive and automatic dispensing equipment field
OKEBond® is your trusted professional partner
Multipurpose Gel Glue GEL-1 in 1 pack |
Brief Introduction
OkeBond® Gel Adhesive is a high-strength, high-viscosity, single-
component ethyl instant adhesive. Its high viscosity and low fluidity
properties are widely used in vertical bonding operations and for
materials with high permeability.
OkeBond® Gel Adhesive is a high-strength, high-viscosity, single-
component ethyl instant adhesive. Its high viscosity and low fluidity
properties are widely used in vertical bonding operations and for
materials with high permeability.
| How to use? |
1) Open the lid and puncture the seal with a needle.
2) Ensure both surfaces are close-fitting, clean and dry.
3 Apply one drop per square inch on one surface only.Avoid spilling
super glue spreads by itself when two surfaces are joined
4) Place in desired position immediately. Apply slight pressure for ten
seconds. (Actual setting time may vary slightly depending on the
surfacesto be bonded.)
5) After use, wipe tip of tube clean with cloth. Replace cap tightly on the
tube and store upright in a cool and dry place
2) Ensure both surfaces are close-fitting, clean and dry.
3 Apply one drop per square inch on one surface only.Avoid spilling
super glue spreads by itself when two surfaces are joined
4) Place in desired position immediately. Apply slight pressure for ten
seconds. (Actual setting time may vary slightly depending on the
surfacesto be bonded.)
5) After use, wipe tip of tube clean with cloth. Replace cap tightly on the
tube and store upright in a cool and dry place
Application |
BONDS:
Metal,Wood, Ceramic, LeatherPaper, Rubber, Plastic and More
Metal,Wood, Ceramic, LeatherPaper, Rubber, Plastic and More
| Testing center |
| Production Capacity |
Small Glue, Great Power! Craftsmanship manufacturing, Building World-famous Brand |
