Model NO.:

CCP-220VAC-(N/P)2KW-10KV

Output Type:

Single

Warranty:

1 Year

Output Power:

2kw

Input Voltage:

220V

Connection Mode:

Series Switching Power Supply

Starting Mode:

Self-excited Switching Power Supply

Voltage Regulating Mode:

Width Modulation Type

Power Supplying System:

Terminal Power Distribution Equipment

Energy Transmission:

One-way Transmission

Modulation System:

PFM

Brand:

Idealtek

Output Voltage:

10kv

Output Current:

200mA

Output Polarity:

Positive or Negative

Circuit Mode:

AC/DC High Frequency Conversion

Working Mode:

Constant Voltage / Constant Current

Output Setting:

10-Turn Potentiometer

Output Display:

LED

Protection:

Short, Oh, Over Load, Load Discharging

Remote Control:

0~10V / 4~20mA Analog Signal Control / RS Ports

Application:

High Voltage Capacitor Charging, High Voltage Char

Trademark:

iDealTeknic

Transport Package:

Plywood Case

Specification:

IGBT & HF transformer

Origin:

China

HS Code:

85044019

Product Description

CCP Series High Voltage Capacitor Charging DC Power Supply
Model: CCP-220VAC-(N/P)2KW-10KV

Peak Power: 2KW
Voltage range: 0 ~ 10KV
Current range: 0 ~ 200mA
4U / 19-inch standard chassis
Precise voltage and current setting and measurement capabilities
OCP, short circuit and load discharging protections etc.

Overview

The CCP series is high-voltage power supply specially designed for high-voltage capacitors charging application.
The unique constant-current working charging mode and reverse-cutting design & protections of this series of power supply best match the requirements of capacitor charging requirements.
CCP series has two configurations according to the output power: 4U chassis and 6U chassis
The 4U chassis models can achieve a maximum output power of 2KW and a maximum output voltage of 60KV.
The 6U chassis model can achieve a maximum output power of 6KW and a maximum output voltage of 100KV.
This series can meet the charging and testing needs of various capacitors.
It is a best choice for HV laboratory testing, product testing and other HV applications.

Features

Can be used as a HV DC power supply or as HV capacitor charging power supply.
Output voltage adjustable from 0 to 100%
Output power: Average charging @ 2KJ/S and the peak charging power can reach 3KW.
Charging in constant current mode and switch to constant current mode till fully charged.
Unique double isolated system, strong anti-interference ability.
Forced air cooling, very rugged design.

Optional functions

0 ~ 10V analog signal control (DB9 / DB15 interface <4U>) (+AC)
RS communication interface (RS232 / RS485 optional) (+RC)

Specifications

Input

Voltage

Single-phase 220V±10% (input tolerance: 10%)

Frequency

50Hz/60Hz

Current

As per output power.

Output

Peak power

2KW

Charging Rate

1KJ / S

Output voltage adjusting range

10KV

Output current adjusting range

0A ~ 200mA

Output polarity

Positive or Negative (both available)
Client must choose one output polarity before ordering.

Line regulation

≤0.5% for no load to full load at output.

Load regulation

≤0.5% for ±10% change in input voltage.

Ripple (Vr.m.s.)

≤0.5%@ rated output.

Output connection

HV connector and line provided by IdealTek.

Efficiency

≥85%

Setting & Display

Output control mode

10-turn potentiometer on front panel.

Display mode

4¹/₂ LED digital display

Protection & Monitoring functions

Load discharging protection

When the load has discharging due to insufficient safety distance between load and ground, the power supply shutdown the high voltage output, and then restarts, so cycle like this till the discharging fault is eliminated.

Short circuit protection

When a short circuit occurs between the load and the ground, the power supply works in constant current mode, the current is limited to the maximum value, and the voltage drops to 0 to protect the internal inverter from damage.

Over current protection

When the users' load exceeds the rated load and cause over-loading, the power supply works in constant current mode, the power supply output current does not change, and output voltage decreases.

Noise

≤55dB

Protection degree

IP20

Cooling method

Forced air cooling

Working environment conditions

Ambient temperature

10ºC~40ºC

Humidity

10%~90%(non-condensing)

Height

≤2000m

Storage environment conditions

Ambient temperature

-20ºC~60ºC

Humidity

10%~90%(non-condensing)

Height

≤4000m

Size (W*H*D) (mm)

19" sub-rack unit with 4U height and 600mm Depth

Note: every power supply has 48 hours full load burn-in test @ 40ºC

Safety caution

This power module has HV output, only professional person could operate it.
Please make sure of good grounding before operation.
Capacitor charging power supply has low internal stored energy, please NO no-loading working.
Keep power module clean and good ventilation.
HV input & output connectors or HV load no touch anything.

Drawings (for reference only)

4U chassis (≤2KW) (RAL7035)

Remote DB15 port drawing and definition

1	Reset/HV Inhibit	High electric level = Reset/HV Inhibit Low electric level = start HV
2	Spare
3	Spare
4	Power Supply Common	Power Supply Ground
5	kV Program Input	0-10Vdc = 0-100% rated output, Zin>10Mohm
6	Spare
7	Spare
8	kV Test Point	0-10Vdc = 0-100% rated output, Zout= 1Kohm, 1%
9	+15Vdc Output	+15Vdc @ 100mA, Max.
10	mA Test Point	0-10Vdc = 0-100% rated output, Zout= 1Kohm, 1%
11	Power Supply Common	Power Supply Ground
12	Charge ends	0V=end
13	Power Supply Common	Power Supply Ground
14	Power Supply Common	Power Supply Ground
15	Power Supply Common	Power Supply Ground

Message Type
* Message Content
* Name
* Phone
* Email
* CAPTCHA

10 Kv 200 Ma Precision High Voltage DC Power Supply for Capacitor Charging

Yangzhou Idealtek Electronics Co., Ltd.