Audited Supplier
TS11P-8F-2G
Full-Duplex & Half-Duplex
Ethernet Switch
10/100/1000Mbps
≦8
Data Provided Over Pairs Over 1/2and 3/6
up to 100m
802.3af
Intermediate Node Routers
Without Firewall
10/100/1000Mbps
Ethernet
Store-and-Forward
PHYNAM
Unit Packge Size: 238*192*87mm, 10PCS/CTN
CE/EMC, CE/LVD, FCC Certification
Dongguan Guangdong China
85176219
Product Description
8 Port 10/100Mbps POE Ethernet switch with 2GE uplink ports
Product Description:
The TS11P-8F-2G is a gigabit uplink 10/100Mbps unmanaged POE switch, which provides eight DATA+POE ports and two pure gigabit data port. Among them, port 1-8 follows the 802.3af/at standard and supports maximum power output of 30w. The POE ports of the switch can automatically detect and supply power to the PD devices that complies with the 802.3af/at standard. Otherwise, there is no power supply output. In addition, the switch supports auto-negotiating traffic control functions and is compatible with terminal devices of 10Mbps, 100Mbps.
The TS11P-8F-2G is usually used to provide power and data transmission for IP cameras, wireless APs, bridges, and IP phones. For terminal devices that do not support POE, the POE splitter can be used to provide power supply and data transmission.
The TS11P-8F-2G adopts plug-and-play design, which eliminates the need for software settings, which greatly facilitates the installation and use of digital monitoring and wireless coverage. In particular, the switch provides a set of DIP switches for easy switching between shared or port isolation modes. In the port isolation mode, 1-8 ports cannot communicate with each other, only through port 9-10 to output data. This mode can effectively suppress the generation of broadcast storms.
Product Features:
The TS11P-8F-2G is a gigabit uplink 10/100Mbps unmanaged POE switch, which provides eight DATA+POE ports and two pure gigabit data port. Among them, port 1-8 follows the 802.3af/at standard and supports maximum power output of 30w. The POE ports of the switch can automatically detect and supply power to the PD devices that complies with the 802.3af/at standard. Otherwise, there is no power supply output. In addition, the switch supports auto-negotiating traffic control functions and is compatible with terminal devices of 10Mbps, 100Mbps.
The TS11P-8F-2G is usually used to provide power and data transmission for IP cameras, wireless APs, bridges, and IP phones. For terminal devices that do not support POE, the POE splitter can be used to provide power supply and data transmission.
The TS11P-8F-2G adopts plug-and-play design, which eliminates the need for software settings, which greatly facilitates the installation and use of digital monitoring and wireless coverage. In particular, the switch provides a set of DIP switches for easy switching between shared or port isolation modes. In the port isolation mode, 1-8 ports cannot communicate with each other, only through port 9-10 to output data. This mode can effectively suppress the generation of broadcast storms.
Product Features:
- Comply with IEEE 802.3, 802.3i, 802.3u, 802.3x, 802.3ab, 802.3q, 802.3af/at specifications.
- 2*10/100/1000Mbps uplink ports, support for auto-negotiation.
- 8*10/100Mbps POE ports, support 802.3af/at standard, maximum 30w power output.
- internal max 120w power supply.
- Adopt Store-and-Forward transmission mode.
- Auto MDI-X function, self-adjusting straight-through line, cross-line connection.
- 4K Mac address table
- One DIP switch supports port isolation setting and max 250m POE transmission(CCTV mode)
- Port status LEDs
Datasheet
| Model | TS11P-8F-2G | |
| Port | 1000M Uplink | 2 |
| 100M POE | 8 | |
| Function | Exchange Mechanism | Store-and-forward |
| Exchange Capacity | 16G | |
| MAC | 4K | |
| Environmental | Working Temperature:0-45ºC Storage temperature :-40-+70ºC | |
| Working Humidity :10%-90% RH non-condensing Storage Humidity:5%-90% RH non-condensing | ||
| POE | IEEE802.3af/at, MAX 30W, MAX power 120W | |
| power | AC input 100~240V 50~60Hz | |
| Network protocol | IEEE 802.3X IEEE 802.3i 10BASE-TX IEEE 802.3u 100BASE-TX IEEE 802.3ab 1000BASE-TX IEEE 802.3af /IEEE 802.3at IEEE 802.3x Flow control | |
| DIP switch | Ports isolation and CCTV mode max 250m transmission switch | |
| Feature | Support VLAN, transmission 250 meter | |
| Speed | Ethernet 10Mbps half-duplex, 20Mbps full-duplex Fast Ethernet 100Mbpshalf-duplex, 200Mbps full-duplex Gbit Ethernet 1000Mbps half-duplex, 2000Mbps full-duplex | |
| Network Media | 10Base-T: Pair 2 Category 3(cat 3) and above UTP/STP(≤100m) 100Base-TX: Pair 2 Category 5(cat 5) and above UTP/STP(≤100m) 1000Base-TX: Pair 2 Category 5e and above UTP/STP(≤100m) | |
| Physical Specifications | products size:190mm*130mm*32mm package size:300mm*175mm*100mm 1.2kg | |
