100~10000m3/H Biogas/Landfill Gas Dewatering Dehumidification System

1,  Design of the Evaporator

The evaporator shell is designed according to the biogas pressure vessel. It is made of Q235 carbon steel. The evaporator core is made of U-tube stainless steel tube. The design is calculated with the optimal flow rate and variable section design theory to meet the rapid change of heat load. The requirement to maintain a stable cooling effect. The process of taking the refrigerant away from the tube and the process of taking the shell away from the shell. Anti-corrosion design, long service life.

Material:

The casing adopts Q235 carbon steel, and the heat exchanger core adopts U-shaped stainless steel tube.

2,  The design of key parts, comprehensive consideration of the characteristics of explosion-proof, anti-corrosion.

3, The quality of the refrigeration system compressor is stable and reliable, and the hot gas bypass valve can be automatically adjusted to meet the requirements of large load changes due to climate change and gas consumption changes.

4,  Refrigeration parts use the world's best refrigeration valve parts brand.

All refrigerant pipes and gas-blocking drainage pipes are anti-corrosion and designed to ensure the reliability of the whole machine.

5,  Control system:

The dehumidifier system control adopts the switch button type and meets the following functional requirements:

The meter displays: high pressure of refrigerant (evaporation pressure), low pressure of refrigerant (condensation pressure);

Electric control cabinet button indication: power indication, operation indication, fault indication, start button, stop button, high voltage fault reset switch;

For remote:

It can provide remote start and stop, remote running status dry contact, fault indication dry contact;

If there are other special control requirements, PLC system can be customized separately;