Audited Supplier
Green
Liquid
Spray
ISO14001, RoHS, ISO9001
Film Forming Matter
Conversion Type
polysv
200L Drum
A side 220 kg, B side 200 kg
Qingdao, China
Product Description
JHSW8604 100% solid Spray Rigid Polyurethane for Drinking Water Pipe is the state of the art 100% solids, ultra fast cure, flexible, spray-applied, high build, and two components aromatic polyurethane elastomer. JHSW8604 is non- toxic, Can be used for the inside and outside of metal pipe or other substrate surface protective coating, lining, wear resistant layer and buffer layer.Advantages:
- Fast cure, short down time, no sagging
- Excellent Physiochemical Properties
- Good adhesion on steels without primer
- 100% Solids, No VOC's, Odorless
- None toxic, can be used in drinking water device, get WRAS approval
- Good resistance to a wide range of chemical attack
- Good heat resistant, heavy duty and Durability
- Seamless, flexible, slick and non-porous
JHSW8604 100% solid Spray Rigid Polyurethane for Drinking Water Pipe can be widely used in Oil & Gas Transmission, inside or outside of steel or concrete pipe, Industrial Facilities, and so on.
Properties:
| Tensile Strength /MPa | ≥30 | Solids Content/% | 100 |
| Elongation/% | ≥20 | VOC | 0 |
| Tear Strength/( N/mm) | ≥70 | Gel Time/s | 50-60 |
| Shore Hardness | ≥75 D | Tack Free/ s | 80-120 |
| Adhesion /(Pull off, steel,MPa) | ≥10 | Shelf Life | 12 months, unopened at 0~40 ºC |
| Density/( g/cm3) | 0.95~1.05 | Flash Point/ ºC | >100 |
| Abrasion Resistance /(GB/T 1689-1998, cm3/1.61km, g) | ≤0.03 | Mix Ratio V/V | 1: 1 |
| Impermeability(0.3MPa/30min) | Impervious | Recommended Spreading Thickness/mm | 2~3 |
| Chemical Resistance | No corrosion, No Blister, No Spalling | Colors: | Optional |
