Audited Supplier
1000kW Generator Testing Resistive Load Bank
Product Introduction
The system can accurately test the output power and load capacity of various generator sets.The system consists of two parts of measurement and loading, including AC load bank, data acquisition system, automatic load and drop control system, cooling device, auxiliary control,PC software,and so on.The user can freely select local control or software control to operate the load bank.
Technical Parameters
Technical Parameters | |
Rating Voltage/Frequency | AC 415V/50Hz, 3 phase 4 wire |
Max Load Power | Resistive Load: 1000kW |
Load Step | Resistive Load:13 steps; 1,2,2,5,10,10,20,50,100,200,200,200,200kW |
Power Factor | 1 |
Load Tolerance(each step) | ±5% |
Load Tolerance(overall) | ±3% |
Display Precision | 0.5 class |
Control Power Supply | Input415VAC 3 phase 4 wire 50hz |
Wire Connection | Load Power Supply Input--Copper bar (star connection) Control power supply input--Connector bar |
Communication Interface | RS485, RS232 |
Insulation Class | F |
Working Mode | Continuous Working |
Cooling | Forced air cooling,Horizontal inlet air,Horizontal outlet |
Transportation | Hoisting, there are lifting lug in top of case and wheel castors in bottom |
Dimension | Approximately; 2440 mm×1250mm×1800mm (Width *Length *Height) |
Operating Environment Parameter | |
Ambient Temperature | -10ºC~+50ºC |
Relative Humidity | ≤95% |
Altitude | ≤2500 meters |
Atmospheric Pressure | 86~106kPa |
