Audited Supplier
STIN-500MW
Product Line
New
Automation
Engineers Available to Service Machinery Overseas
Flexible
Comprehensive
CE, ISO
Intelligent Manufacturing
Flow Production Line
Container Shipping
Product Description
Turnkey solution
Compatible size
a. standard length 1640-2200mm,width 950-1200mm;
b. other specs customized
Compatible module
a. 5BB,MBB,IBC,MWT,HJT,N-TYPE
b. full-cell,half-cut,shingling
c. framed,framed(no C side),frameless
d. glass-backsheet,dual-glass/bifacial,ultra-light,thin-film module
Main equipment
| SOLAR PANEL PRODUCTION LINE | ||
| 1.Auto Glass Loader | 10.2nd Glass Loader | 19.Auto Junction Box Soldering & Testing Machine |
| 2.1st EVA Cutter | 11.EL+VI Tester | 20.Auto Curing Line |
| 3.Bussing Template Placer | 12.2nd Glass Repairing Unit | 21.Auto Filing Machine |
| 4.Stringer | 13.Auto Edge Taping (G2G) | 22.Hi-pot Tester |
| 5.Auto Robotic Layup | 14.Laminator | 23.IV Tester |
| 6.Auto Bussing/ICB Soldering | 15.Auto Trimming | 24.EL Tester |
| 7.Auto String Taping | 16.Manual Inspection | 25.Auto Labeling Machine |
| 8.2nd EVA Cutter | 17.Framing System | 26.Final Inspection Unit |
| 9.Backsheet Cutter | 18.Auto Junction Box Assembly System | 27.Auto Palletizing |
Main equipment introduction
Auto busssing soldering machine
MS40B High Speed Multi Busbar PV Cell Soldering Stringer is a fully automatic machine, which can be used with different types of silicon solar cells, monocrystalline or polycrystalline, and solder them into a string. It is suitable for traditional 156 3BB~12BB cells, and 185/3BB~12BB cells (after upgrading). With the use of PLC, servo, SCARA robot, industrial image processor system and other advanced automation technology, all processes from cell feed to string outlet are automated without manual operation. The designed capacity of this equipment is up to 4000 cells per hour.Main parts and components are listed as follows:
| Name | Brand |
| PLC | KEYENCE |
| Servo | YASKAWA |
| Robot | EPSON |
| CCD | HIKIVISION |
| Sensor | OMRON, PANASONIC |
| Touch screen | ADVANTECH |
| Terminals | WAGO, DEGSON |
| Cable carrier | IGUS, MISUMI |
| Bearing | NSK |
| Linear screw module | THK, HIWIN, TBI, etc. |
| Pneumatic parts | SMC, AirTAC, |
| Mechanical parts | MISUMI, YIHEDA, etc. |
| Motor | JSCC, Leadshine |
Laminator
Efficient production of various specification modules, annual capacity can be 280MW, saving spaceDouble-layer, double chambers,laminating and curing can run together
Two layers convey independently, no interference mutually
Each layer with two chambers transmission together, more stable and reliable
High efficient cleaning system, intelligent control mode to fulfil non-person lamination
Energy saving design can decrease power consumption
Production specification
Lamination Size: 7800×2600mm Dimension: 40450×3710(without platform)3550mm
Weight:158T Open Cover Height: maintenance300mm
Lamination Chamber Height: 25mm Average Conveying Speed: 5M/Min-14M/Min
Control Mode: Touch Screen Control Temperature Control: PLC Intelligent
Heating Mode: Oil Heating Power Supply: AC380V 50Hz;3Phases 5Lines
Total Power: 394KW Running Power:180KW
Temperature Uniformity: ±1.5ºC Temperature Precision: ±1ºC
Temperature Range: Room--160ºC Vacuum Pumping Speed: B1:600L/S
Compressed Air Flow:1600L/min Compressed Air Pressure: 0.6MPa-0.8MPa
Height of Working Platform:connection with the assembly line 960±10mm, the second layer 2560±10mm
Partner:
