Audited Supplier
100V 30A Charge 300A Discharge Lithium Battery Pack Comprehensive Tester
ACEY-BIT100-30A300A can be used to test Battery open circuit voltage, battery AC internal resistance, continuous charging current, continuous charging voltage, continuous discharging current, continuous discharging voltage, charging overcurrent protection current, discharging overcurrent protection current, short circuit protection time, overcurrent delay time, post-test voltage.
*The device uses infrared scan barcode input (SN) to start the test or detects voltage to start the test automatically.
*Application:All li-ion battery with the port of CH+ P+ CH- P-
Testing items :
*Voltage: No-load voltage and Short circuit protection voltage after the test is completed, Range:0-100V.
*Internal Resistance: ACIR1000hz, Range:0-4000mΩ
*Charging overcurrent protection current , Range:0-30A.
*Continuous charging current, Range:0-30A.
*Continuous charging voltage monitoring, Range:0-100V.
*Discharge overcurrent protection current and delay time, current range:0-300A, overcurrent maximum power 30KW.
*Overcurrent test mode: (1) Step test (2) quick test.
*Continuous discharge current, Range:0-300A
*Continuous discharge voltage judgment, Range: 0-100V
*Short circuit protection time:≤1000μS, Max short circuit current about 5000A
*Single cell voltage monitoring
*Appreciation of charge and discharge voltage: During the working test, if the power supply is cut off and the MOS tube of the protection board is turned off, no inrush current will be generated, and the protection board of the lithium battery pack will not be damaged.
*Support MES system
*Database: The software comes with a database, which can generate excel tables.
*Step-by-step mode: the test sequence can be adjusted automatically.
*Support chassis expansion.
Technical Parameters:
*Voltage range: 0-100V Resolution:1mV Accuracy: 0.1%RD+0.1FS
*Internal resistance: 0-2000mΩ Resolution:0.001mΩ Accuracy: 0.1%RD+0.1FS
*Charge current: 0-30A Resolution: 0.001A Accuracy: 0.1%RD+0.1FS
*Discharge current 0-300A at the highest voltage, continued discharge current 300A,
Resolution: 0.001A Accuracy: 0.1%RD+0.1FS
*Overcurrent delay time: 0-30S Resolution: 1mS Accuracy: 0.1%RD+0.1FS
*Short circuit time: 0-2000μS Resolution: 1μS Accuracy: 0.1%RD+0.1FS
*NTC range: 0-100K 0.001K
*R1 range: 0-100K 0.001K
*Power supply: AC 200V-240V
*Maximum working power for charging:5000W (When charging with maximum current)
*Maximum working power for discharging:30KW (When discharging with maximum current)
*Surge voltage:<15V
Q1:How to order?
A: Please send us your purchase order by email or call us sales, or we can make the proforma invoice under your request.We need to know the following information for your order before sending your Pl. Payment methods? T/T, L/C, D/P and so on.
1)Product information-quantity, specification(size, material, technological if needed and packing requirements etc.)
2)Shipping information-company name, street address, phone number,destination sea port.
Q2: How to control quality?
A,All the raw materials by IQC(Incoming Quality Control) before launch whole process into the process after the screening,
B, Process each ink in the process of IPQC(Input Process Quality Control)patrol inspection.
C, After finished by QC full inspection before packing into the next process packing.
D, OQC before shipment for each slipper to do full inspection.
Q3:How do I install and operate the machine myself?
A: Our system development is based on the integrated development view, when you get the machine, just connect it to the power supply and the machine is ready to work, as the English software is already installed on the machine, all you need to do is to learn how to use the software, a complete English user manual will be sent to you with the machine.
Q4: How do I get technical support after purchase?
A: Our factory provides online technical support in English, you can get to know us easily online through Skype, Wechat, WhatsApp or E-mail. If you need any remote assistant support, we will support you through Team viewer software.
Q5:What's the warranty for the items?
A: We are very confident in our products and we package them very well so you will usually receive your order in perfect condition. The warranty on the equipment is one year (12 months) and if any part of the equipment is damaged within one year due to non-human factors, we will provide a replacement part free of charge.
Q6:Can I customize products?
A: Yes, OEM&ODM is available! we can provide not only standard machines but also customized machines according to your requirements. Don't hesitate to tell us your requirement, we will try our best to meet your needs.
