100W 150W 200W 250W 300W 12V Constant Voltage Switch Power Supply

100W 150W 200W 300W 12V CONSTANT VOLTAGE SWITCH POWER SUPPLY

1 Model No.:  S-150W-12V

2 Appearance Dimension: 198(L)*98(W)*42(H)mm

3 N.W.: 540g

4 Canning Material: Aluminum

5 Input voltage :AC110V/220V 50-60Hz

6 Output voltage :12V ±2%DC

7 Output current : 1.25A±0.5%

 

Specifications:

Description:

1 Environmental Conditions

1.1 Operating Temperature: -10ºC~+50ºC, 20%~95%RH(without condensation)

1.2 Storage Temperature: -20ºC~+85ºC, 20%~95%RH(without condensation)

2.3 Relative Humidity: 0.02~0.05%/ºC

3.4 Heat-dissipating Method: Natural Cooling / Fan Cooling / Blower Cooling

2. Input Features

2.1 Rated Input Voltage Range:220VAC

2.2 Input Voltage Range: 110/220VAC±15%

2.3 Input Frequency Range:50~60Hz(except Dc input)

2.4 Input Under-voltage Protection:115~150% interim mode

2.5 Input Under-voltage Recovery: Automatic recovery

2.6 Input Over-voltage Protection:115~150% interim mode

2.7 Input Over-voltage Recovery: Automatic recovery

2.8 Impact Current ≤1% (the highest input voltage full load)

2.9 Overall Efficiency ≤0.5% (rated input full load)

3. Output Features

3.1 Output Voltage Range: 12V±2%(Dual Outputs)

3.2 Output Current Range: 12.5A±0.5%(Dual Outputs)

3.3 Ripple & Noise(mVp-p)≤100 mVp-p

3.4 Rise Time≤50 ms

3.5 Output Delay≤S

3.6 Voltage Adjustment Rate≤0.5%

3.7 Load Adjustment Rate≤1%

4. Output Features
4.1 Output Voltage Range: 12V±2%(Dual Outputs)
4.2 Output Current Range: 12.5A±0.5%(Dual Outputs)
4.3 Ripple & Noise(mVp-p)≤100 mVp-p
4.4 Rise Time≤50 ms
4.5 Output Delay≤S
4.6 Voltage Adjustment Rate≤0.5%
4.7 Load Adjustment Rate≤1%

5. Protective Feature
5.1 Output Over Current Protection: Current drooping type
5.2 Output Short Circuit Protection: IGBT
5.3 Output Over-voltage Protection: Soft start protection

6. Reliability Requirements
6.1 MTBF:50,000 HOURS
6.2 Annual Repair Rate<0.3%