100X Float Control Valve Diaphragm Type

Water control valve for irrigation

By mounted with different kind of pilot valve, can be archieved as:
Pressure reducing/regulating valve,
Pressure relief/sustaining valve
Remote float control valve
Solenoid control valve
Anti-Surge control valve
Flow rate control valve

Materials: 

 

               
Size: 1.5"-4"  BSP/BSPT/ NP/NPT
    DN50-DN200 FLANGED
Special specs. available upon request.

The 100X remote float control valve consists of main valve, needle valve, ball valve, float valve etc., which is composed of a hydraulic control system. After setting, the liquid level is automatically controlled. This product directly uses liquid level to control, does not need other devices and energy, easy to maintain. It is not affected by water pressure, and with reliable sealing. This series of valve products are widely used in the liquid level control of water towers, pools and other facilities in water supply pipe network systems such as high-rise buildings and living areas etc.

Pressure: PN10, PN16, PN25

WORKING PRINCIPLE:

When the pipe feeds water from the inlet end, since the needle valve, the ball valve and the float ball valve are normally open, the water enters the pool through the micro filter, the needle valve, the control room, the ball valve, and the float ball valve, and the control chamber does not form pressure, the main The valve is opened and the water tower (pool) is supplied with water.

When the water level in the water tower (pool) rises to the set height, the float rises and close the float valve. The water pressure in the control room rises, the main valve is closed, and the water supply stops. When the water level drops, the float valve is reopened. The water pressure in the control room drops, and the main valve is opened again to continue the water supply, maintaining the set height of the liquid level.