a. CE standard spray booths
b. Side downdraft airflow, no need for excavating pits
c. Electric heating system, environmental
d. Direct-drive fan unit, with air volume at 4 x 28,000m3/h and empty loaded air speed over 0.3m/s
e. Electric roller shutter door at both ends facilitates the movement of vehicles
f. With man lift for painting the top of vehicles, save labor cost and improve efficiency
2. Specifications
| CE Compliance Bus Spray Booths | |
| ITEMS | SPECIFICATIONS |
| Design standard | BS EN 13355: 2004+A1:2009 BS EN 60204: 2006+A1:2009 |
| Internal dimensions | 16000 X 6000 X 5000mm (L X W X H) |
| External dimensions | 16200 X 9120 X 5860mm (L X W X H) |
| Airflow | Side Downdraft |
| Plenum | 800mm high |
| Extraction | Through exhaust plenum chambers on both sides |
| Extraction area | 26.4m2 |
| Entrance door | 5500x4500mm (WxH), 2 sets, electric roller shutter door |
| Service door | 800x2300mm(WxH), 4 sets |
| Ceiling lights (LED) | 28 sets, each 4 X 18W, 2,016W total |
| Sidewall lights | 20 sets, each 4 X 18W, 1,440W total |
| Brightness | >1,000LUX |
| Filters | Bag filter, high efficiency ceiling filter, floor filter, exhaust filter |
| Intake/Exhaust unit | Direct-type turbine fan, 4 x 2x7.5KW |
| Air volume | 4x28,000m3/h |
| Empty loaded air speed | 0.32m/s |
| Heats | Electric heating, 4 sets, 210KW per set Gas and diesel heating as option |
| Controls | CE standard control box |
| Inverter | Option |
| Rated power | 915KW |
3. Details






4. Loading

5. Factory photos

6. Typical projects display






Audited Supplier










