Audited Supplier
extender
Component signal, SDI, AV, VGA
Multimedia, Home Appliance, Speaker, Projector, Telephone, Microphone, Computer, STB, DVD, HDTV
HDMI Extender Coaxial
caratar
customization
China
Product Description
This product can extend the full HD HDMI signal to 300 meters with a single coaxial cable, no image loss and delay. This product is designed for a variety of scenarios, especially in engineering.
Features:
- Extend Full HD HDMI signal up tp 300m over single coaxial cable
- No loss and delay
- Support infrared two-way return
- Support resolution 1920*1080@60Hz
Specification:
Input power standand | 5V |
Consumption | 3W |
HDMI port | HDMI-A female |
Coaxial port | BNC |
Connector | Coaxial port |
Transmitter distance | up to 300m |
Resolution supported | 1080p@60Hz/ 1080p@50Hz/ 1080p@30Hz/ 1080p@25Hz/ 720p@60Hz/ 720p@50Hz/ 480@60Hz |
Opearation Temperature | -20ºC ~70ºC |
Storage Temperature | -40ºC ~80ºC |
Humidity | 20% ~ 90% RH(Non-consider) |
Product pannel:
Connection Diagram:
1080p Many to Many KVM RX TX HDMI Fiber Extender 120m over IP
120M HDMI KVM Many to Many Over IP Extender w/ IR
The 120M HDMI KVM Many to Many Over IP Extender with IR (HKE12MMA10) , support USB keyboard and mouse data, IR signal transmitted over a LAN (Local Area Network).
Features
Support resolution up to 1080p Full HD
Support TMDS equalization and enhancement
By transmitting keyboard and mouse Datas via LAN, it is easy to control PC or other media players remotely
Routes up to 16 transmitters to 253 receivers by 1000M IGMP network switch
Support infrared remote control signal pass through
Support Fiber-Optic converter to extend transmission distance up to 20KM
FAQ
Q: Why the direct one to one connection cannot be used?
A: You must use a super Cat5 / 6e network cable (wire sequence T-568B), please check if the addresses of the DIP switches of the transmitter and receiver match
Q: "Check input signal" appear on the screen? (Check input signal)
A: The input signal is inaccessible, please check if the source of the HDMI input signal is connected normally. It is recommended to replace the shorter HDMI cable. Input signal recommended within 5 meters.
Q: (Searching Tx) appears on the screen?
A: The network cable is partially disconnected, please check if the network cable is normal. It is recommended to use Super
Category 5 and Category 6 network cables.
A: You must use a super Cat5 / 6e network cable (wire sequence T-568B), please check if the addresses of the DIP switches of the transmitter and receiver match
Q: "Check input signal" appear on the screen? (Check input signal)
A: The input signal is inaccessible, please check if the source of the HDMI input signal is connected normally. It is recommended to replace the shorter HDMI cable. Input signal recommended within 5 meters.
Q: (Searching Tx) appears on the screen?
A: The network cable is partially disconnected, please check if the network cable is normal. It is recommended to use Super
Category 5 and Category 6 network cables.
Connect Diagram
* 1 to 1 connection
Set IP address of the transmitter and receivers to the same
* 1 to Many connections
Set IP address of the transmitter and receivers to the same
* Many to Many connections
By using the IGMP network switch, support up to 16 transmitters (Addr: 0000~1111) in one local area network. Set the receivers' IP address to the same as the transmitter which the receiver wants to connect to.
Set IP address of the transmitter and receivers to the same
* 1 to Many connections
Set IP address of the transmitter and receivers to the same
* Many to Many connections
By using the IGMP network switch, support up to 16 transmitters (Addr: 0000~1111) in one local area network. Set the receivers' IP address to the same as the transmitter which the receiver wants to connect to.
