Audited Supplier
ACME-MW10KW
Single
1 Year
6kw
380V
Parallel Switching Power Supply
Self-excited Switching Power Supply
Width Modulation Type
Terminal Power Distribution Equipment
Two-way Transmission
PWM
CE, ISO
Acme
220V/380V
1 Phase 2 Wires/3 Phase 4 Wires
PWM
6kw
Soft Start
2450MHz
0.5%
90%
0-50%
Pure DC Output
Can Be Set Time
RS485/Modbus/RS232
Cc, Power Limit
ACME
Wood Packing
6kw
Jinan
8504401990
Product Description
Product introduction
This product adopts continuous wave magnetron (Panasonic or Richardson) to realize microwave power of 6kW (microwave frequency 2450±15 MHz) microwave generator. The system is cooled by water, mainly composed of high frequency power supply, MW-Head and MW-System. High frequency power supply includes anode high voltage power supply, filament power supply, magnetic power supply and control system, etc. The MW-Head contains magnetron and excitation cavity, etc. The microwave system includes Circulator, Coupler, Three-stub tuner, etc.
The microwave generator has two control modes: touchscreen interface and RS485 communication, can adapt different usage needs. The expansion port is reserved, the control function can be added according to actual usage needs.
This product adopts continuous wave magnetron (Panasonic or Richardson) to realize microwave power of 6kW (microwave frequency 2450±15 MHz) microwave generator. The system is cooled by water, mainly composed of high frequency power supply, MW-Head and MW-System. High frequency power supply includes anode high voltage power supply, filament power supply, magnetic power supply and control system, etc. The MW-Head contains magnetron and excitation cavity, etc. The microwave system includes Circulator, Coupler, Three-stub tuner, etc.
The microwave generator has two control modes: touchscreen interface and RS485 communication, can adapt different usage needs. The expansion port is reserved, the control function can be added according to actual usage needs.
| Num | Item | Technical requirement | Remark |
| 1 | Input voltage | 380V±10%,50Hz±2Hz | Three phase and four wire |
| 2 | Microwave output power | ≥6kW | Continuous wave |
| 3 | Microwave output frequency | 2450MHz±15MHz | |
4 | Microwave conversion efficiency | ≥65% | |
| 5 | MW-Power adjust | 10%~100% continuous adjustment | |
6 | Flange joint | BJ22/BJ26 | |
| 7 | Control mode | Local control/communication | |
8 | Protection | Filament over current and under current; Anode overpressure and overcurrent; Magnetic field overcurrent; Ignition; Magnetron over-temperature; Water protection; reflection protection | |
9 | Volume | HF-Power supply: 482mm*177mm*556mm M-W Head:200mm*250mm*300mm | W*H*D |
10 | Usage environment | Work temperature:-10~40ºC Storage temperature:-20~50ºC Humidity:95%no condensation Altitude:<3000m | <0ºC antifreeze required |
11 | Cooling mode | Water | External supply of equipment, Flow≥2.5L/min |
| Num | Code | Form | Type | Pin | Definition | Characteristic |
1 | XS1 | Terminal block | TD40-01-C | 1 | A | Power supply |
| 2 | B | |||||
| 3 | C | |||||
| 4 | N | |||||
2 | XS2 | Terminal block | 2EDGRKP-5.08/WC-8P | 1 | VCC | +24V |
| 2 | TEMP | Temperature switch signal | ||||
| 3 | FLOW | Flow switch signal | ||||
| 4 | GND | 24VGND | ||||
| 5 | / | / | ||||
| 6 | A1 | PC communication | ||||
| 7 | B1 | |||||
| 8 | RGND | |||||
3 | XS3 | Terminal block | 2EDGRKP-5.08/WC-4P | 1 | VCC | +24V |
| 2 | GND | 24VGND | ||||
| 3 | A2 | Function expansion port | ||||
| 4 | B2 | |||||
4 | XS4 | Terminal block | 2EDGRKP-5.08/WC-2P | 1 | C+ | Magnetic field output+ |
| 2 | C- | Magnetic field output- | ||||
| 5 | X1 | Terminal | JS333(M6 black) | / | HGND | HV-GND |
| 6 | X2 | Stud | M6(butterfly shape) | / | PE | Safety GND |
7 | HV | HV- Conductor | White AEG-15kV-2.5mm² | / | FA | Filament output |
| / | A | Anode HV-Output | ||||
| 8 | IN | Quick screw joint | G1/4-Ø12*8 | / | / | Water inlet |
| 9 | OUT | G1/4 Ø12*8 | / | / | Water outlet |
| Num | Code | Form | Type | Pin | Definition | Characteristic |
1 | HV | High pressure tightness plug | BL-HV15kV | / | FA | Filament output |
BL-HV15kV | / | A | Anode HV-Output | |||
| 2 | X1 | Terminal | JS333(M6 black) | / | HGND | HV-GND |
| 3 | X2 | Stud | M6(butterfly shape) | / | PE | Safety GND |
4 | XS1 | Terminal block | 2EDGRKP-5.08/WC-6P | 1 | VCC | +24V |
2 | TEMP | Temperature switch signal | ||||
3 | FLOW | Flow switch signal | ||||
| 4 | GND | 24VGND | ||||
| 5 | / | / | ||||
| 6 | / | / | ||||
| 5 | IN | Quick screw joint | G1/4-Ø12*8 | / | / | Water inlet |
| 6 | OUT | G1/4 Ø12*8 | / | / | Water outlet | |
7 | / | Flange | BJ26 | / | / | MW-Output |
