Audited Supplier
FL-P04
ISO, RoHS, CE
Highway,Street,Square,Road
Steel
Round,Octagonal,Polygonal,Single-Arm,Double-Arm
Hot-DIP Galvanized
Optional
Q235B/A36/Q345b/A572,Q460, ASTM573 Gr65, Gr50
Advanced Submerge-Arc Welding Technology
3m to 12m Street Light Pole Height
Available
1 PC
Conical,Square,Round,Octagonal Optional
En ISO 1461 or Equivalent
En 1011 or Equivalent
En 40-5 or Equivalent
Customized
Customized
7m/S or Customized
2.5mm-4mm
FOREVELIT
Bubble Packing+Blanket Packing
10M
China
94059900
Product Description
Pole Shaft -Tapered,octagonal .square etc for option.
Pole Top - A removable top cap is provided for poles
receiving drilling patterns for side-mount luminaire arm assemblies. Other pole top options include Tenon Top, Top Cap
Only or Open Top which is typical when the pole top diameter
matches the necessary slip-fit dimensions.
Hand Hole - A covered hand hole with hardware and
grounding provision are provided,also called maintenance door.Anchor Base & Cover - Optional for decorative base as special order.
Anchor Bolts -This part optional.
Material:engineering steel Q235,hot-dip galvanized/non galvanizedfor alternative.But mostly is non galvanized.
Folding anchor bolts to save the space is available.
Hardware - All nuts and screws are SS201 or SS304.
Finish - Finishes include hot-dip galvanized or passivation
and painted. Please consult factory for special finishing colors and fixture matching options. When storing light poles outside,
remove all protective wrapping immediately upon delivery to
prevent finish damage.
Design Criteria - Standard EPA (Effective Projected Area) and
weight values are based on Standard Commercial Criteria for side and top mounted fixtures only. Satisfactory performance
of light poles is dependent upon the pole being properly
attached to a supporting foundation of adequate design.
