Audited Supplier
HY-Neon
RoHS, CE
6-10W
White/Red/Blue/Green/Yellow/RGB
12V/24V
IP66
16*8mm/16*25mm
AC110V-220V
5m/Reel
2835/5050/3528
3m Tape
DC12V/24V
120degree
2.5m/Cutted
Silica Gel
3years
Carton
Made in China
94056000
Product Description
13*8mm/16*25mm High Quality Bended Well LED Neon Strip for Signage
Neon strips Features:
1).. Conventional 5 meters roll, light angle 120 degrees.
2)..Free to bend, can be arbitrarily fixed on the concave and convex surface, easy to install!
3)..Every three LEDs can be cut off along the above tangent line, without damaging other parts. Various lengths of light bar can be customized according to customer requirements.
4)..Small size, rich colors, with 3M double-sided adhesive on the back, for paste
5)..It has the characteristics of low power consumption, low heat generation, no glare, and impact resistance. Low voltage DC 12V, 24V supply, high safety and reliability
details of quotation:
application places:
characteristic:
1)..This product is affixed with double-sided 3M strong adhesive tape on the back of the product. Simply remove the protective film when installing and stick it directly to the desired location.
2)..The maximum number of connections for this type of light bar single-channel drive is 1 volume. Exceeding this quantity, it is necessary to add a power drive circuit. Each volume is 5M.
3)..Calculate the power supply, design the power distribution scheme: the number of LED strips of the budget X the power of the single strips = the total power consumption. (It is recommended that the power supply has a margin, 80% of the rated power is used)
Installation matters:
1)..Note that the output DC voltage of the switching power supply should be consistent with the rated voltage of the light bar. Do not light the light bar directly with the AC 220V.
2)..Ensure that the light bar is firmly and reliably installed. It is best to use a special 3M adhesive to fix it.
3)..Please cut at the scissor mark, if it is installed outdoors, you must handle the waterproof measures in the middle connection.
4)..Do not bend the light bar excessively. The minimum angle must not be less than 10 degrees
5)..It must be installed in an anti-static environment. It is recommended that the operator wear an electrostatic ring.
Precautions:
1)..Working temperature is -50°C~70°C
2)..Avoid strong acids and alkalis around the work environment
3)..If the working environment is outdoor, please do a good job of waterproofing the butt joints
porducts pictures:
details picture:
package:
5m/reel -50m/reel
cartons packged
production lead time:
8-15days for 10000meters
Best quality with good price!!
please contact me for understanding more information :
name--lisa.jiang (miss)
you are welcome~!!!!
Neon strips Features:
1).. Conventional 5 meters roll, light angle 120 degrees.
2)..Free to bend, can be arbitrarily fixed on the concave and convex surface, easy to install!
3)..Every three LEDs can be cut off along the above tangent line, without damaging other parts. Various lengths of light bar can be customized according to customer requirements.
4)..Small size, rich colors, with 3M double-sided adhesive on the back, for paste
5)..It has the characteristics of low power consumption, low heat generation, no glare, and impact resistance. Low voltage DC 12V, 24V supply, high safety and reliability
details of quotation:
application places:
characteristic:
1)..This product is affixed with double-sided 3M strong adhesive tape on the back of the product. Simply remove the protective film when installing and stick it directly to the desired location.
2)..The maximum number of connections for this type of light bar single-channel drive is 1 volume. Exceeding this quantity, it is necessary to add a power drive circuit. Each volume is 5M.
3)..Calculate the power supply, design the power distribution scheme: the number of LED strips of the budget X the power of the single strips = the total power consumption. (It is recommended that the power supply has a margin, 80% of the rated power is used)
Installation matters:
1)..Note that the output DC voltage of the switching power supply should be consistent with the rated voltage of the light bar. Do not light the light bar directly with the AC 220V.
2)..Ensure that the light bar is firmly and reliably installed. It is best to use a special 3M adhesive to fix it.
3)..Please cut at the scissor mark, if it is installed outdoors, you must handle the waterproof measures in the middle connection.
4)..Do not bend the light bar excessively. The minimum angle must not be less than 10 degrees
5)..It must be installed in an anti-static environment. It is recommended that the operator wear an electrostatic ring.
Precautions:
1)..Working temperature is -50°C~70°C
2)..Avoid strong acids and alkalis around the work environment
3)..If the working environment is outdoor, please do a good job of waterproofing the butt joints
porducts pictures:
details picture:
package:
5m/reel -50m/reel
cartons packged
production lead time:
8-15days for 10000meters
Best quality with good price!!
please contact me for understanding more information :
name--lisa.jiang (miss)
you are welcome~!!!!
