Cast Resin Power Supply Transformer

1) 22 years' manufacturing experience with three subsidiaries
2) Authoritative type test report
3) KPLC's supplier in Kenya
3) IP54
Tech data of 10kv, 11kv SCZ(B)10 series on-load tap changer resin insulation dry-type power transformer

1. Standards: GB1094-1996; JB/T10088-2004; GB/T10228-2008; EQV IEC726
2. Voltage Grade: 6, 10, 6.3KV, 11kV
3. Voltage Regukation Mode: Off circuit tap changing; On load tap changing
4. Tapping Range: ± 5%, ± 2× 2.5%, ± 4× 2.5% or others
5. Frequency: 50Hz; 60Hz
6. Phase: Three phase
7. Connection Sign: Yyn0, Dyn11 or others
8. Short Circuit Impedance: Standard impedance (For details see technical data sheet)
9. Max. Temperature: 120K
10. Cooling Method: ONAN or ONAF
11. Insulation Class: Grade F

Features:
High voltage coils are wrapped with Polyester enameled wires, filled with glass fiber, and then resin under vacuum condition. It becomes solid under high temperature. It equipped with high mechanical intensity, low discharge partly; Low voltage coils are wrapped with a whole piece of copper foil, with strong anti-shortcut capacity. The core is made of silicon steel. By reasonable choosing magnetic density, decrease the empty loading loss effectively
Fire protection, anti-explosion, and no pollution
Coil is free from humidity, low noise and well characteristic of heating dispersion
Low loss, energy saving, free from maintenance, small size, light, and easy for installation